Will Roadmaster Comfort Ride Shock Absorbers RM-2460 work with Lippert Correct track kit

Question

Question:

Will Roadmaster Comfort Ride Shock Absorbers RM-2460 work with Lippert Correct track alignment kit which is installed on my 2013 Keystone Alpine 3555RL? Correct track kit provided 2 inch lift for the RV.

asked by: Andrei G

0

Expert Reply:

Yes, the Roadmaster Comfort Ride Shock Absorbers # RM-2460 is perfectly compatible with the Lippert Correct Track alignment hangers you have on your 2013 Keystone Alpine 3555RL.

expert reply by: Jameson C

0

Answer 1

You can get the longer U-bolts here; I checked with Roadmaster, and the 2630 are simply 7 inch long U-bolts, so you can use the following: - 3" Round Trailer U-Bolts (Qty 2) #SP01-060 These are 7 inches long so they are the same, and for a…

view full answer...

Answer 2

On your 2019 Grand Design Reflection 28BH the square tube the hangers are mounted to will be plenty strong but likely won't be how the Roadmaster Comfort Ride Shock Absorbers #RM-2460 will mount. The mounts will be to the inside of the…

view full answer...

Answer 3

When installing a new suspension system like the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2460 you mention, it is not required but a good idea to replace your old U-Bolts. Reason being that, any bolt, of any grade, when…

view full answer...

Answer 4

As long as your trailer has 3 inch diameter axles the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2460 is a confirmed fit and will work well. It does not require you to convert to slipper springs.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of the…

view full answer...

Answer 7

Sorry for any confusion that may have arose, but what you want is the U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles #APUBR-35. These are designed for 3 inch diameter, 8,000 lb axles and are compatible with the Roadmaster Comfort Ride Leaf…

view full answer...

Answer 8

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Will Roadmaster Comfort Ride Shock Absorbers RM-2460 work with Lippert Correct track kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching