Does Yakima BigCatch Fit Factory Crossbars of 2010 Toyota 4Runner

Question

Question:

I have a 2010 Toyota 4Runner SR5 with factory crossbars. Your website says part# Y04091 will fit this vehicle... but will it fit the factory crossbars? Yakimas website says it will not. Looking to transport Old Town Sportsman 120 fishing kayak. Thanks

asked by: Joe

1

Helpful Expert Reply:

Yes, I checked with Yakima and the Yakima BigCatch # Y04091 is a confirmed fit for the factory crossbars of your 2010 Toyota 4Runner.

expert reply by: Jameson C

1

Answer 1

The Rhino-Rack RVP Roof Rack for Fixed Mounting Points #RRRVP27 are rated for 149 lb capacity. Your Old Town Sportsman PDL 106 has a weight of 76 lbs so this roof rack will work well. With this combination I recommend the Malone SaddleUp Pro Kayak…

view full answer...

Answer 2

Thanks for the picture! I just spoke with my rep at Yakima and got some specifications and dimensions off of the Yakima BigCatch Kayak Carrier item #Y04091 you referenced. It is 9-1/4" x 6-1/2" x 5-1/2" and has a weight…

view full answer...

Answer 3

Yakima does not have a roof rack solution for a 2001 Ford Escort 4-door sedan, but Inno does. You can use the following parts to add a roof rack: Inno Square Load Bars, #INB117 Inno Roof Rack Support Feet, #INSUT Inno Roof Rack Fit Kit, #INK294

view full answer...

Answer 4

The Thule DockGlide Kayak Carrier with Tie-Downs #TH896 will fit crossbars up to 4" wide x 1-1/2" tall so it will install just fine on your 1-1/4" square crossbars for your Malone MicroSport trailer. These have a weight capacity of 75…

view full answer...

Answer 5

For your 2005 Subaru Legacy Outback Wagon, I recommend using the: -Inno Square Crossbars #INB117, with the feet #INTR, and the fit kit #INTR104. This roof rack will easily and quickly attach your factory roof rails and provide an attachment point for…

view full answer...

Answer 6

Thank you for all of the information! We do have a solution for you to carry a heavier fishing kayak, like the Old Town Predator PDL or the Hobie Outback, on the roof of your 2018 Subaru Outback Wagon Touring Edition. For your application I recommend…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Does Yakima BigCatch Fit Factory Crossbars of 2010 Toyota 4Runner

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching