What is Included in the Replacement Truxedo Shur-Bond Velcro Strips

Question

Question:

Does this item include both the hook and loop parts or just the glue down hook strips the hooks are what deteriorate?

asked by: Ray

0

Expert Reply:

I spoke with my contact at Truxedo and she informed me that the Replacement Truxedo Shur-Bond Velcro Brand Fastener # TX1115173 that you referenced just comes with the hook side that goes on the bed rails.

expert reply by: Jameson C

0

Answer 1

I am happy to help! Starting with the two holes in the shorter hangers included in the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center #APT8 you were looking at. Those holes are not for bolting but…

view full answer...

Answer 2

I reached out to my contact at TruXedo and from your description and pictures they were able to identify your model as the LO PRO. Also, she knows that the 2005 F250 has a slightly longer bed than most, and as such you will need the the TruXedo…

view full answer...

Answer 3

If the width of your existing fastener is 1-5/16 inches the correct replacement for your TruXedo Tonneau Cover is the part #TX1115174. This is designed for 6-1/2 foot beds but if you happen to have a long 8 foot bed you would need part #TX1115173…

view full answer...

Answer 4

We have 1-1/4 inch wide Velcro strips for Truxedo tonneau covers like the part #TX1115173. These slide in a rail like you said yours does as well. This fastener replaces the hook piece which attaches the tonneau cover to the truck rails. The mating…

view full answer...

Answer 5

The Replacement Truxedo Shur-Bond Velcro Brand Fastener, part #TX1117876 is designed to work with TruxSport tonneau covers only. From the photo you sent it looks like you have a Lo Pro tonneau cover on your truck. The correct replacement Velcro for…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 9

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What is Included in the Replacement Truxedo Shur-Bond Velcro Strips

Product Page this Question was Asked From

Continue Researching