EcoHitch Stealth Trailer Hitch for 2015 BMW X5

Question

Question:

Can you tell me the part number for the ecohitch with the removable receiver hitch for a 2015 BMW X5 Thanks

asked by: Scott S

0

Expert Reply:

The EcoHitch Stealth that fits your 2015 BMW X5 is part # 306-X7265 and is a Class III trailer hitch with a 2" receiver. Please note that this will not fit if your have an M performance model.

If you let me know what you plan on using this trailer hitch for I can make additional recommendations as necessary.

expert reply by: Jon G

0

Answer 1

We have a version of the EcoHitch that fits your 2016 BMW X5 that was designed for versions of the vehicle that have the backup sensors with part #EH44FR. This would be your best option and gives you ability to remove lower hitch opening when not…

view full answer...

Answer 2

The EcoHitch part #306-X7265 that fits your 2016 BMW X5 does have a 750 lb tongue weight capacity. At one point it was listed differently but we have confirmed for sure that this has the 750 lb tongue weight capacity.

view full answer...

Answer 3

According to my research, the BMW Trailer Coupling Prep Package S8SLA contain a pre-wired pigtail for use with a plug-in style trailer wiring harness but not the actual trailer wiring harness nor a trailer hitch. That said, this plug-in style…

view full answer...

Answer 4

Yes, Draw-Tite hitch #75600 does require rear fascia trimming for installation on the 2016 BMW X5. The linked photo shows you an underneath view of the trimmed fascia. The normal above-ground view shown in the second photo gives you a better…

view full answer...

Answer 5

For your 2018 BMW X5 lower fascia trimming will be required to install either the Draw Tite part #75600 or the EcoHitch part #306-X7265 you referenced as well. Due to the design of the lower fascia on your vehicle there's no way to fit a hitch…

view full answer...

Answer 6

The EcoHitch Stealth Trailer Hitch Receiver #306-X7265 that you referenced does not require any fascia or bumper cutting on your 2013 BMW X5 for installation, and it's actually the only hitch available for this vehicle that doesn't. While you…

view full answer...

Answer 7

If you are looking for the best option of hitch, the EcoHitch Stealth Trailer Hitch #EH44FR. This will be completely hidden when not in use, does work with the back up sensor, and will not require cutting to get installed. It is also rated up to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

EcoHitch Stealth Trailer Hitch for 2015 BMW X5

Product Page this Question was Asked From

Continue Researching