How Do I Tell If My 2012 Chevrolet Traverse Has a Tow Package

Question

Question:

Im not sure but I dont think that my 2012 traverse has a tow package. there is a junction box/ area under the car that looks like the same ends/connectors as ones behind each tail light. So Im wondering why I couldnt just plug in underneath car at I think is junction/splitter for taillights?

asked by: Laird D

1

Helpful Expert Reply:

In order to determine if your 2012 Chevrolet Traverse has the factory tow package you will want to look for a sticker in your glove box. If there is a three digital "V92" code shown then you have the factory tow package. If you do then you will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118384 which plugs into a single port under the rear bumper. If you do not then you will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118450 which plugs in behind the tail lights.

I am not sure which connector your are referring to under the vehicle as there could be several but I have attached a photo of what the plug will look like if you have the factory tow package. I have also attached an install video of the non-tow package option for you as well.

expert reply by: Conner L

1

click to enlarge

Answer 1

I can definitely help you out with equipment that allows you to tow with your 2012 Chevy Traverse but it is my understanding that the V92 Trailer Towing Package (as it is called on page 9-48 of your owner's manual) cannot be added to a…

view full answer...

Answer 2

I took a look at the online owner's manual for your 2012 Chevy Traverse and found that models with the factory tow package can safely pull a trailer that weighs up to 5,200 pounds. With this in mind, you should have no trouble pulling a…

view full answer...

Answer 3

For your 2009 Chevy Traverse, lets start at the very beginning so I can walk you through parts needed. If you do not have a trailer hitch receiver, I recommend the Draw-Tite Class III #75528. This is a very strong hitch that will meet your towing…

view full answer...

Answer 4

Looks like you found the chart that Jeff D made that shows common axle capacities based on diameter: Typical Axle Diameters Based on Axle Capacity - 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter - 3,500-lb Axles: 2-3/8 inch diameter -…

view full answer...

Answer 5

Trailer axles made from square tubing tend not to be weight-rated as consistently as round axles. In other words there is more potential variance in the weight rating of a square axle; two axles of the same dimensions could easily be rated…

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

The 2x2 inch square axle is likely 3,500 lbs or less capacity. I would need more spindle dimensions or bearing numbers to assist. If you pull a hub and measure at the spindle where the bearings and seal ride using the digital caliper like #PTW80157 I…

view full answer...

Answer 8

I recommend taking a look at the Curt Echo Mobile Trailer Brake Controller part #C51180 for a 2019 Chevrolet Traverse which is completely plug and play so no splicing or permanent modifications are needed to the vehicle like drilling into the dash.…

view full answer...

Answer 9

Rusty weld nuts can make trailer hitch installs pretty difficult but there are solutions. First you want to clean them as well as possible so that hopefully that allows the bolts to thread. But worst case scenario you can use a thread tap to clean…

view full answer...

Answer 10

The Tow Ready trailer wiring harness #118450 is designed to fit all models of the 2009 to 2012 Chevy Traverse. I have included a link to a video showing installation on a 2012 Traverse for you.

view full answer...

Answer 11

Everything I am seeing for your 2012 Chevy Traverse shows a 2,000 lb towing capacity. There's nothing can be done to increase the towing capacity of a vehicle so your best option would be to either find a smaller trailer or a larger tow vehicle.…

view full answer...

Answer 12

For your 2017 Buick Enclave, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75528 which will require the removal of the facia door panel. This can be trimmed and reattached if you desire. I've…

view full answer...