Correct Transmission Line Fittings to Install Transmission Cooler on 2009 Chevy Traverse

Question

Question:

Hi Im planning to install Derale Series 8000 Plate-Fin Transmission Cooler using the Derale Radiator Adapter Fittings for GM. Reading about this product on your site Iv read it doesnt fit on recent GM truck, so I wonder if it will fit on my Chevrolet Traverse 2009. My transmission cooler in included in the radiator, so I plan to add the second one in series with the original. Is those fitting are the good one for my need. I have the regular radiator not the one included in tow package Thanks

asked by: Jean-François B

0

Expert Reply:

According to Derale, the correct fitting to install the D13504 cooler in your 2009 Traverse would be part # D13035, if the return transmission line is attached to the radiator using an E-clip. You would need two of them.

If the connection does not use an E-clip, you would need to use a compression fitting. The correct fitting will depend on the outside diameter of your transmission lines. For a 5/16 inch line use part # D13031, for a 3/8 inch line use # D13032 and for 1/2 inch line use part # D13033. You will need two fittings. The existing transmission line would need to be cut and flared to use the fittings.

expert reply by: Mike L

0

Answer 1

I can definitely help you out with equipment that allows you to tow with your 2012 Chevy Traverse but it is my understanding that the V92 Trailer Towing Package (as it is called on page 9-48 of your owner's manual) cannot be added to a vehicle…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 11

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 12

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Correct Transmission Line Fittings to Install Transmission Cooler on 2009 Chevy Traverse

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching