What is Lug Nut Torque with Aluminum Lynx Trailer Wheel Trailer Wheel # LH45FR

Question

Question:

Hi what is torque spec for lug bolts on this aluminum wheel ?

asked by: Jim K

0

Expert Reply:

When mounting the Aluminum Lynx Trailer Wheel # LH45FR you'd need to use between 75 and 85 ft lbs of torque on the lug nuts.

expert reply by: Jameson C

0

Answer 1

Aluminum wheels actually have steel inserts where the lug nuts touch them so there is no need for an adapter and you can just bolt the wheel right up. I don't know what size wheel you are looking for but I attached a link to all the aluminum…

view full answer...

Answer 2

First, I do recommend verifying exactly how much clearance you have. The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel #AM30670 you are looking at is 20.7" tall while your Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White…

view full answer...

Answer 3

The 145/80-12 tires would be about an inch wider and an inch taller than your current 4.80-12 tires. The 1 inch height difference would raise your ride height by a half inch, and the wider tread would provide more pavement contact for greater…

view full answer...

Answer 4

Yes, the trailer wheel and tire part #AM31202 that you referenced has an 81 mph speed rating. This has been verified.

view full answer...

Answer 5

The Kenda S-Trail ST145R12 Radial Trailer Tire with 12" Galvanized Wheel #AM31202 will definitely meet your lower pressure and wider needs, but it will also be a little taller. With that said, you will want to make sure you have enough clearance…

view full answer...

Answer 6

If the Kenda Karrier S-Trail ST145/R12 Radial Tire #AM10140 and the 12" Aluminum Wheel #LH45FR with 5 on 4-1/2" bolt pattern matches up with what you have now, then it will be a direct fit replacement. If it does not, then you will need to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The Kenda S-Trail ST145R12 Radial Trailer Tire with 12" Aluminum Wheel - 5 on 4-1/2 - Load Range D #AM31202 referenced in your question is a great radial tire that has a maximum load of 1,220 pounds at 65 psi. The aluminum wheel features a 5 on…

view full answer...

Answer 9

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

view full answer...

Answer 10

Yes, we have the aluminum trailer wheel part #LH45FR which is a 12 inch diameter trailer wheel with a 5 on 4-1/2 inch bolt pattern that has a weight capacity of 1,520 lbs like you are in need of. None of the steel options we carry have the capacity…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

What is Lug Nut Torque with Aluminum Lynx Trailer Wheel Trailer Wheel # LH45FR

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching