Repacement Roof Vent Operator for MaxxAir 00-05100K

Question

Question:

Will this part work in a model 5100? Attached is a photo of the part that needs to be replaced. Thanks

asked by: Brian G

0

Expert Reply:

The Replacement MaxxAir Operator Mechanism # MA10-20281K-1AF you referenced is compatible with MaxxAir MaxxFan Plus # MA00-04500K and MaxxAir Deluxe # MA00-07000K or # MA00-07500K powered lift roof vent.

As long as the center drive is hexagonal, the correct replacement operator for your MaxxAir Roof Vent model # MA00-05100K is item # MA10-20281K-3CF. Take a look at the vent assembly diagram on page 4 of the Repair Parts List document I have attached for you.

If you have an older model with a square drive then the only solution is to replace both the operator mechanism and the lifter arm. The correct lifter arm replacement is # MA10-20222KS.

expert reply by: Carla M

0

Answer 1

When installing the #MA10-20281K-1AF replacement operator, you might need to 'clock' the mechanism slightly which could take a little bit of trial and error, but the replacement operator does include installation instructions. I've…

view full answer...

Answer 2

There are not installation instructions available specific to the Replacement MaxxAir Roof Vent Manual Lift. I have attached an exploded diagram that shows the placement of the lift in the fan assembly for your reference.

view full answer...

Answer 3

We do have the correct replacement operator mechanism for your MaxxFan Plus model 4751KS, which is the following part: - Replacement Operator Mechanism #MA10-20281K-1AF Instructions are included along with the mechanism.

view full answer...

Answer 4

For your MaxxAir model 8900K, we have the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF and the Replacement Lift Arm for MaxxFan Roof Vents #MA10-20222KS. From your pictures and what you mention…

view full answer...

Answer 5

Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF is what you want for your MaxxAir Deluxe Fan if it is a power lift or the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF if it…

view full answer...

Answer 6

The operator could indeed be the cause of the vent lid not staying open. In order to find the correct replacement we'd need to know the model number found on the inside under the screen. The Replacement MaxxAir Roof Vent Operator part…

view full answer...

Answer 7

If the lid no longer opens or closes even when using the manual knob then that means the operator mechanism is bad which is rather common to have to replace. The part you'll need for this is the Replacement Operator Mechanism for MaxxAir MaxxFan…

view full answer...

Answer 8

Sounds like you have a damaged or worn out roof vent operator and need to replace it with the part #MA10-20281K-1AF since you said the motor doesn't want to fully open or close the lid and it's difficult to turn by hand.

view full answer...

Answer 9

The correct lift motor you need for your Maxxair roof vent is the part #MA10-20270.

view full answer...

Answer 10

To replace the manual lift operator on your MaxxAir 5100k #MA00-05100K you'll want to use the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Repacement Roof Vent Operator for MaxxAir 00-05100K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching