The Retracted Height from the Bottom of the Wheel to the Mounting Bracket on a Dutton Lainson Jack

Question

Question:

What is the retracted height from the wheel bottom to the center of the mounting bracket?

asked by: Allison

0

Expert Reply:

I went out into our warehouse and pulled a Dutton Lainson Jack # DL22800 to measure the distance from the bottom of the wheel to the center of the mounting bracket when retracted and found that distance to be 13 inches.

Check out the video I attached that shows me taking this measurement.

I attached a link to an FAQ article on trailer jacks for you to check out also.

expert reply by: Jameson C

0

Answer 1

These trailer jacks come pre-greased and must be disassembled to be greased when needed. Dis-assembly starts with removal of the cap at the top of the jack. I have provided a drawing that should help with dis-assembly and re-assembly.

view full answer...

Answer 2

The swivel trailer jack we offer that has the lowest retracted height is the Fulton F2 part #F1413040134 which has a height of 11 inches from the center of its mounting bracket to bottom of wheel. The part #DL22800 has this height a little taller at…

view full answer...

Answer 3

I do carry replacement parts for the Dutton-Lainson Sidewind Swivel Trailer Jack, part #DL22800 that you have referenced. The replacement handle is the Dutton-Lainson Replacement Handle, part #DL22448 and the bushings for the handle you will need are…

view full answer...

Answer 4

I can certainly provide those measurements for you! I spoke with my contact at Dutton-Lainson about the Pull Pin, Easy Swivel Trailer Jack #DL22800 and Replacement Wheel #DL22410. He confirmed that the inner bore of the wheel measures 0.645 inches.…

view full answer...

Answer 5

At capacity your trailer will weigh 6,000 lbs plus the weight of your trailer. You will need to pick a jack that can safely handle the maximum tongue weight that your trailer will see. Tongue weight is usually 10-15 percent of the total weight of the…

view full answer...

Answer 6

The wheel on the Dutton-Lainson Pull Pin Easy Swivel Trailer Jack is solid and made a poly molded hard plastic so you won't have to worry about a flat tire. The tire can also be replaced with Replacement Wheel #DL22410

view full answer...

Answer 7

I went out to the warehouse and pulled Dutton Lainson trailer jack #DL22800 to take the measurements for you. The 3 holes closest together are 1 inch apart on center. From the third hole to the furthest away hole is 2-1/2 inches. Side to side the…

view full answer...

Answer 8

The bracket height on the Dutton Lainson Pull Pin, Easy Swivel Trailer Jack with 8" Wheel #DL22800 is 13", which is the distance from the center of the mounting bracket to the bottom of the wheel on this jack.

view full answer...

Answer 9

There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options:…

view full answer...

Answer 10

If you need a replacement wheel for your Dutton Liaison Single Wheel Jack #DL22800, the part you need is #DL22410. The jack you have is not designed for a second wheel. Instead, I recommend the Fulton Bolt-Thru #FXPD15L. It features a two-wheel…

view full answer...

Answer 11

The Dutton-Lainson Swivel Marine Jacks are manufactured in the USA. These include the #DL22580 and the #DL22800 1500 lb swivel jacks. These are both galvanized steel which will do a great job fighting saltwater corrosion.

view full answer...

Answer 12

Any of our parts that are manufactured in the USA have that noted in the item description. If you're looking for an American made product, the Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack with 8" Wheel - Sidewind - 1,500 lbs #DL22800 is…

view full answer...

The Retracted Height from the Bottom of the Wheel to the Mounting Bracket on a Dutton Lainson Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching