What is Weight of EcoHitch for 2018 Tesla Model 3 and Access Hole Cover to Preserver Aerodynamics

Question

Question:

What is the weight of this item? Also is there any research that’s been done on the affects on aerodynamics/efficiency adding this product? Thanks.

asked by: Tim

0

Expert Reply:

The weight of the EcoHitch part # EH84GR which fits your 2018 Tesla Model 3 is 45 lbs. When not in use you could use the access hole cover part # 306-XA2002 which would totally cover up the hole and would give you same aerodynamics as before the hitch was installed.

expert reply by: Jameson C

0

click to enlarge

Gene M.

6/11/2020

I have a 2020 Model 3 on and have ordered the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" 306-X7373. Do I need to order the 306-XA2002 as well to cover the hitch hole when receiver? Saw a reference that some may already a removable cover in this location. Would it be returnable if not needed.

Reply

Jacob H.

6/15/2020

You would need to check to see if your 2020 Tesla Model 3 has a removable access panel where the hitch would come out. If you do not have this panel then you will want to pick up the panel cover.

Reply

Answer 1

When installing the EcoHitch Trailer Hitch Receiver #EH84GR on 2018 Tesla Model 3's they needed to cut a 3-1/2" or 4" oval l(the larger opening will just give you more clearance to work with) on the underbody trim to make room for the…

view full answer...

Answer 2

We haven't yet installed the EcoHitch #EH84GR on a 2022 Tesla Model 3 yet, so I can't say for certain what kind of clearance you need, but you can take a measurement on your own and compare it to the #RM-076 high/low adapter to determine if…

view full answer...

Answer 3

The difference in weight between the EcoHitch #306-X7373 and Stealth Hitch #391TES317 is going to be negligible, as both weigh around 45-lbs. If you're planning on towing and go the Stealth Hitch route, you'll need the #391TES317T instead of…

view full answer...

Answer 4

Yes, the Stealth Hitches Hidden Rack Receiver is a confirmed fit for the 2022 Tesla Model 3. Order the same #391TES317 (for accessories only) or #391TES317T (for towing and accessories)

view full answer...

Answer 5

We offer two different hitch fits from Stealth Hitch for a 2021 Tesla Model 3. If you'll be using the hitch as an attachment point for a hitch mounted accessory such as a bike rack or cargo carrier only, you'd want to use the #391TES317 which…

view full answer...

Answer 6

The tongue weight capacity of the Stealth hitch #391TES317 that fits your 2019 Tesla Model 3 is 200 lbs and the EcoHitch #EH84GR is 300 lbs which also is a confirmed fit. Both of these are great options with the big advantage that when you don't…

view full answer...

Answer 7

The Curt 2-inch trailer hitch part #C45FR is a fit for your 2019 Tesla Model 3 and is by far the best value hitch option out there. It's a new fit at this time (April 2020) so we don't have much feedback on it or an install video. I did…

view full answer...

Answer 8

The EcoHitch Stealth Trailer Hitch Receiver part #EH84GR is a fit for the 2020 Tesla Model 3. The EcoHitch is completely hidden behind the bumper and has a removable square receiver tube. The receiver tube unbolts from the cross body of the hitch.…

view full answer...

Answer 9

For the 2022 Tesla Model 3 we do have a hitch with the EcoHitch part #EH84GR but the hitch you referenced does not fit as it was designed for older versions of the vehicle.

view full answer...

Answer 10

I checked with EcoHitch and can verify that the EcoHitch Stealth Trailer Hitch Receiver #EH84GR for a Tesla Model 3 does have a tongue weight of 300 lbs.

view full answer...

Answer 11

While there isn't a locking pin for the lower portion of the EcoHitch Stealth Trailer Hitch Receiver #EH84GR the good news is this won't be a high-theft item at all for a few reasons. Most people would not assume that it comes off as it…

view full answer...

Answer 12

The ground clearance of a trailer hitch on a 2020 Tesla Model 3 will be pretty much the same no matter which option you go with as they all install in the same fashion. The location of the receiver tube is dictated by the manufacturer due to where…

view full answer...