Bike Rack Recommendation for Carrying Giant LaFree+1

Question

Question:

Bike is a Giant LaFree+1. Weighs approximated 55 pounds, has fender and is a STEP THROUGH model. Car is a 2018 Subaru Crosstrek. Pleas see if you have anything that would work please. Thank you.

asked by: Robert

1

Helpful Expert Reply:

We have the perfect bike rack fro your Giant LaFree+1 that is heavy, has fenders, and has a deep step through frame with the Thule Easy Fold XT part # TH903202. This rack was designed for heavier e-bikes that commonly have the step through frame and fenders so it will work great with yours. I attached a picture that shows a similar bike setup as yours secured to it. What's also really nice about this bike rack is that is has a ramp that stores in the rack too which makes loading and unloading the bikes easier!

This rack also fits 2 inch and 1-1/4 inch hitch sizes so it will fit either hitch size you'd have installed on your 2018 Subaru Crosstrek. If you are in need of a hitch too the Curt part # C13382 is a really great and easy option as well. It also only has the hitch opening that hangs below the rear bumper so it looks nicer as well overall.

I attached a review video for this rack for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Patrick M.

4/28/2020

I have a Ford Escape with 2 Hitch receiver. I just bought 2 Giant LaFree+1 bikes for my wife and me. Due to the bikes fenders and rear rack battery holder it appears the only bike rack that will work is the Thule EZ Fold XT 2E. My daughter has a regular Ladies Trek 7000. So my question is....can I convert the Thule EZ Fold to carry 3 bikes? Any suggestions? Please advise

Reply

Chris R.

4/30/2020

There isn't a way to convert the Thule EasyFold rack so that it can secure 3 bikes, and I do agree that the EasyFold is the best option for your Giant Lafree+ 1 bikes. For your daughter's bike your best option is likely with a roof mounted carrier like the Yakima FrontLoader # Y02103. If you don't yet have a roof rack on your Ford Escape please let me know the model year and I will be happy to make a specific recommendation.

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 3

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 9

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 10

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...

Answer 11

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 12

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...