Will Curt Multi Fit Trailer Hitch Fit 2005 Chevy Tahoe

Question

Question:

Will the Curt 13900 fit my 2005 Tahoo LT?

asked by: Claude J

0

Expert Reply:

According to the linked installation instructions the Curt Trailer Hitch Receiver - Multi Fit # C13900 is compatible with your 2005 Chevy Tahoe LT. You will have to drill out the holes marked A, C, and D on both sides for this application.

expert reply by: Jon G

0

click to enlarge

Answer 1

The Dexstar Conventional Steel Wheel with Offset #AM20504 is an excellent replacement option for your application as it fits the Goodyear Endurance ST205/75R15 Radial Tire and your baby moon hubcaps perfectly! Just be sure to check and make sure the…

view full answer...

Answer 2

The Curt hitch part #C13900 that you referenced is designed to fit frame widths that range from 31 to 41 inches in width based on the holes you use. Check out the picture I attached to see how the holes match up with frame widths as well.

view full answer...

Answer 3

The Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" #C13900 measures 4-3/8 inches from the frame mounting point to top of crossbar. It measures 6-7/8 inches from the frame to the bottom of the crossbar and top of the receiver collar,…

view full answer...

Answer 4

The Curt #C13900 is width adjustable, determined by where the bolts are installed in the crossbar of the hitch. If the hitch is assembled in its narrowest orientation as explained on page 3 of the linked instructions, it'll fit on frames that are…

view full answer...

Answer 5

The good news is that you are well on your way to completing the installation on your 2008 Chevy Express Van. What you will want to do to complete the installation is to first locate the output wire for the electric brakes. It is located under the…

view full answer...

Answer 6

The Curt Class 5 Universal Weld-on Hitch w/ Brackets #C47CR will allow you to weld on a receiver to your 2005 Thomas school bus. This hitch has brackets which will give you a 9" drop from your frame. The hitch is designed to fit a frame width…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

view full answer...

Answer 10

The Torflex Lift Kit #K71-707-02 may be exactly what you need for your Winnebago Micro Minnie 1706FB with tandem torsion axles but we do not have any database of axles and I was unable to find the specific axles on your trailer in my research. This…

view full answer...

Answer 11

Hey Greg, The AquaFresh Exterior Water Filter System #AF77FR is designed to work with standard (3/4") garden hose fittings. If you're in need of a hose that's made of non-toxic material then you can also pick up AquaFresh's 25'…

view full answer...

Will Curt Multi Fit Trailer Hitch Fit 2005 Chevy Tahoe

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching