Highest Weight Capacity 3 Inch Gooseneck Hitch Ball

Question

Question:

The 3 inch ball that etrailer recommends is rated at 30,000lbs. Is this the highest rated?

asked by: David

0

Expert Reply:

The highest rated 3" gooseneck hitch ball is the 30,000 lbs B&W 3" Hitch Ball # BWHB94008.

expert reply by: Kyle S

0

Answer 1

The size of the hitch ball itself is the same but there are differences between the standard hitch balls and a gooseneck ball. The shank on a standard hitch ball like the hitch ball you came from, part #BWHB94005, is threaded so that the nut can be…

view full answer...

Answer 2

The Redline 1/2 Inch Greasable Hinge Pin, #HP12412G, is a great option to replace the missing hinge pins on your 2006 Gearbox 335FS toy hauler. These hinges are a universal fit item and include a grease zerk fitting for easy lubrication. If only…

view full answer...

Answer 3

The body lift definitely complicated getting a gooseneck hitch installed as the rails for the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BWGNRK1059 will attach directly to the frame of your truck. As i am…

view full answer...

Answer 4

The problem with putting a gooseneck hitch in a truck with a body lift is that the gooseneck hitch mounts to the frame, and as you know a body lift will lift the body higher off of the frame. Well, a gooseneck hitch installs onto the frame and the…

view full answer...

Answer 5

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 6

With the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1100 that is made for your 1997 Ford F-250 without the overload springs, you can cut 10" off the mounting brackets in the event that you do add overload springs. This is found…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Highest Weight Capacity 3 Inch Gooseneck Hitch Ball

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching