How Much Assembly Is Required for the Thule Camber 2 Bike Rack

Question

Question:

Hello..The Thule Bike Rack TH912XTR.....does it come assembled? If not, how much assembly is required? Compatible for a 2017 Honda CR-V? Thanks!

asked by: Denny K

1

Helpful Expert Reply:

The Thule Camber 2 Bike Rack part # TH9058 comes almost completely assembled. The only thing you will need to do is attach the shank/stinger to the upright which is only two bolts as you can see in the attached photo. There are no additional tools needed for this either as Thule includes the only one you need.

In regards to compatibility, it will work just fine with your 2017 Honda CR-V and it will even allow you to tilt the bike rack down to access your rear hatch.

expert reply by: Conner L

1

click to enlarge

Answer 1

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 2

Congrats on your new bike rack! While both Class I and Class II hitches have the same 1 1/4 inch opening, they have different towing and weight capacities. Manufacturers sometimes build a stopper inside the Class I hitch receiver to prevent Class II…

view full answer...

Answer 3

The Thule Camber 2 Bike Rack #TH9058 weighs approximately 28-lbs. I've attached a brief video that shows this rack.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Michele, Yes, there were no design changes to the 2024 models so the Curt Trailer Hitch Receiver #C94NR would still be a compatible fit for your 2024 Buick Envision. If you need trailer wiring as well then you would want the Curt T-Connector…

view full answer...

Answer 6

Since you have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #C13200 on your 2017 Toyota Highlander you aren't limited to a certain type of rack because your hitch is a class III hitch receiver. Both the Thule Apex XT 4…

view full answer...

Answer 7

The Thule Camber 2 bike rack has not been discontinued. It has is available as part #TH9058. It still tilts and works really well. It's a favorite among our installers here. It is a durable rack, made in the USA, and has a lifetime warranty. It…

view full answer...

Answer 8

For your Specialized Como SL 5.0 bike we have a lovely option for a 1-bike rack that is both easy to use and lightweight, the Kuat Transfer: - Kuat Transfer V2 Bike Rack for 1 Bike #KU64FR The Transfer V2 #KU64FR is just 26 lbs which is really light…

view full answer...

Answer 9

We have a solution for you either way but the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR may or may not work with your particular step through bikes. There are different styles of step through bikes and depending on how low the step through…

view full answer...

Answer 10

To determine if the Thule Apex #TH9024XT will clear the spare tire on your Wrangler, you will need to take a measurement from your hitch pin hole rearward until your spare tire is cleared (see photo). In order for the rack to fit on your Wrangler,…

view full answer...

Answer 11

The Thule Apex XT 2 Bike Rack for 1-1/4" and 2" Hitches - Tilting #TH9024XT is a nice bike rack that has the integrated cable lock, HideAway cradles with grooves for your cables and ratcheting anti-sway to protect your bikes and your…

view full answer...

How Much Assembly Is Required for the Thule Camber 2 Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching