Picking Out Replacement Roof Vent Cover for 2010 Arctic Fox B1150

Question

Question:

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03. Then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles. Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

asked by: Jerry J

0

Expert Reply:

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".

To pick the correct cover, you will also need to know the type of hinge you need.

There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.

In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..

expert reply by: Jameson C

0

click to enlarge

Jerry J.

7/29/2019

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. The best way to find the correct replacement vent cover for your cargo trailer is to measure the vent. Most standard vents are 14-1/4 by 14-1/4 inches wide, 14 x 14 inches wide or 13 x 14 inches wide. Next if the manufacturer name is on the vent that will help. Finally, you will need to look closely at the hinged portion of the vent. If there is a rolled metal hinge attached to the vent cover like on the Ventline Replacement Smoke Dome Assembly, part # BV0554-03. Then that is most likely the correct vent for your trailer as long as the measurement matches. There are also vent covers with plastic snap-in style hinges and different raising and lowering arm styles. Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

Reply

Jameson C.

7/29/2019

Thanks for the pictures! Based on that we know that the correct replacement lid you need is the part # 61628.

Reply

Answer 1

It's a good idea to ask for a recommendation because the FX4 models can be tricky as there are a number of kits that do not fit, and dually trucks also have their own applications. And the best air bags are going to be from Firestone because they…

view full answer...

Answer 2

I am glad you came to us before you made your purchase as you are correct in that not all air bag and 5th wheel hitch kits are compatible with one another. For your 2000 Ford F-350, I recommend the Air Lift LoadLifter 5000 Air Helper Springs part…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...

Answer 12

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Picking Out Replacement Roof Vent Cover for 2010 Arctic Fox B1150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching