Correct Roadmaster Steering Stabilizer for a 2019 Jayco Alante 26X

Question

Question:

I need the stabilizer when I look up parts you only go to 2018 model so what can I do

asked by: William C

0

Expert Reply:

If you are referring to the Roadmaster Reflex Steering Stabilizer then the correct one for your 2019 Jayco Alante 26X is part # RM-RBK22-RSSA. If you are instead looking for a rear anti-sway bar we have this as well, the Roadmaster Rear Anti-Sway Bar part # RM-1139-146. The rear anti-sway bar is one of the most beneficial components you can add/upgrade on a motorhome. The other popular upgrades are the SumoSprings Maxim Custom Helper Springs part # SSR-184-40-1 for the rear axle and the SumoSprings Rebel Custom Helper Springs part # SSF-170-40-2 for the front axle.

expert reply by: Conner L

0

Answer 1

That's a really good question. The issue that Ford has with the sway bars they install on their chassis is that since they do not install the body of the RV onto the chassis it's really hard for them to come up with a decent sway bar in their…

view full answer...

Answer 2

Yes, the Roadmaster Sway Bar part #RM-1139-146 does fit your 2020 Jayco Alante 26x built on a Ford F-53 chassis with a 16k GVWR.

view full answer...

Answer 3

To soften road bumps in your 2011 Thor Hurricane Class A Motorhome I suggest an air bag kit. An air bag will do a better job than simple rubber jounce spring at absorbing road shocks before they can reach the Ford F-53 chassis on which the Hurricane…

view full answer...

Answer 4

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 8

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...