Does RetraxONE XR Tonneau Cover Have Capacity for Truck Bed Ladder Rack

Question

Question:

How much weight will this cover be capable of holding? enough for a rtt? I have a set of the rhino aero bars, what feet/supports will I need? Is there a taller option from any brand that would still support a rtt? Thanks

asked by: Scott T

0

Expert Reply:

If by RTT you mean a roof top tent the RetraxONE XR Hard Tonneau Cover w/ Trax Rails # RTT-60851 would easily be able to support that.

Then for a roof rack setup that fits the rails of the cover and your Rhino Rack Aero Bars you'd want the # RRRLT600 and you'd be set. There isn't a taller option from Rhino Rack but you could use the taller Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-58.

expert reply by: Jameson C

0

Answer 1

The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.

view full answer...

Answer 2

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6 bolt…

view full answer...

Answer 3

The Thule replacement M8 T-bolt #853-5715 T-bolt head measures 3/4 inches. The threaded part of the t-bole is 1-inch long, and it has a .30 inch diameter. I have attached a photo of the 853-5715 with the dimensions noted you can check out.

view full answer...

Answer 4

The t-bolt used will depend on the accessory being installed. I reached out to my contact at Retrax to find the size of the track to know what size t-bolts it will accommodate. The track measures 13/16 inches wide x 1/4 inch tall with the top opening…

view full answer...

Answer 5

Yes, the Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Racks #853-5715 will fit into the cross bar channels of Yakima HD Crossbars like #Y01157.

view full answer...

Answer 6

The Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" Long, part #RRVA180B-RRRLT600, is what you need. It has a weight limit of 220lbs. The legs mount directly to the tracks of your…

view full answer...

Answer 7

The Rhino-Rack you will need for your 2020 Chevrolet Silverado 5'8 truck bed with the RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots, part #RTX24YR, is the Rhino-Rack Vortex Crossbar System for…

view full answer...

Answer 8

To get your Thule ProRide XT #TH598004 type bike rack attached to your RetraxONE XR Hard Tonneau Cover #RTT-60851 you'll need the Fit Kit for Thule Podium-Style Roof Rack Feet #THKIT3101. This fit kit will slide into the rails of your #RTT-60851…

view full answer...

Answer 9

I reached out to Thule and the #853208914 does not have a weight capacity they've tested it at, but it's not truly going to be weight bearing a lot of weight, so it would be an acceptable solution to mount the Batwing to your Thule crossbars.…

view full answer...

Answer 10

It sounds like you are trying to find a bolt that fits in the t-track of the Subaru OEM Extended Aero bars manufactured by Thule. For that you would want to use an M6 bolt. I have listed a few M6 bolt options below, varying in length. - Replacement…

view full answer...

Answer 11

There is an eyebolt kit, as well as bolts that will fit your Retrax XR: - Eye Bolts #Y01162 - Replacement M6 x 30 mm Square Head Bolt #RR99HB There are no plates I'm aware of that fit.

view full answer...

Answer 12

You will be able to use the M6 x 30 mm Square Head Bolt #RR99HB in the rails on RetraxONE XR Hard Tonneau Cover #RTT-60851 on your 2021 Toyota Tacoma with a 5' bed. We do have the Tonneau Cover Adapter Kit #Y01155 which allows you to add a Yakima…

view full answer...