T-Bolt that Can Fit Tracks of RetraxONE XR Tonneau Cover

Question

Question:

Can I purchase just the t-bolts that fit inside the track on the top of the rails on my retraxone xr?

asked by: Ted

0

Expert Reply:

The channels of the RetraxONE XR part # RTT-82383 are a standard size which means standard roof rack t-bolts like the # 853-5715 would work.

expert reply by: Jameson C

0

Answer 1

The t-bolt used will depend on the accessory being installed. I reached out to my contact at Retrax to find the size of the track to know what size t-bolts it will accommodate. The track measures 13/16 inches wide x 1/4 inch tall with the top…

view full answer...

Answer 2

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6…

view full answer...

Answer 3

I reached out to the manufacturer regarding the end caps for your Retrax cover and unfortunately per the manufacturer the end caps are not available by them selves they are only available if you buy the entire replacement side rail such as the…

view full answer...

Answer 4

For a set of Replacement Load Stops for your Thule TH500 Ladder Rack you can use their kit #753-3761 which includes 4 each load stops, knobs and T-bolts. My contact at Thule said the part number you referenced is the original part number but that…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The Thule replacement M8 T-bolt #853-5715 T-bolt head measures 3/4 inches. The threaded part of the t-bole is 1-inch long, and it has a .30 inch diameter. I have attached a photo of the 853-5715 with the dimensions noted you can check out.

view full answer...

Answer 7

In regards to the Retrax XR Hard Tonneau Covers like part #RTT-60335, they accept track mounted accessories from all major brands such as Thule, Yakima, and Rhino-Rack. That said, they don't really offer just the t-bolts since they will be…

view full answer...

Answer 8

Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit #RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.

view full answer...

Answer 9

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

view full answer...

Answer 10

The Yakima JetStream crossbars have a T-slot that is 1 inch wide and 1/2 inch tall so any t-bolt used would have to fit within those measurements. The 4-bolt set of M10 x 1.5 x 25 bolts #Y8880184 will work since the head is 3/4 inches square but I…

view full answer...

Answer 11

The weight capacity of the Rhino-Rack Vortex Aero Crossbars part #RRVA165B-2 is 165 lbs which is for both bars and the weight must be evenly distributed. If you're looking for more, the Rhino-Rack Heavy-Duty Roof Rack Crossbars part…

view full answer...

Answer 12

Yes. You can use the Fastenal Locknut - Zinc Plated Steel - 1/2" - Qty 1 #1140163 with the M8 T-Bolt #853-5715.

view full answer...

T-Bolt that Can Fit Tracks of RetraxONE XR Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching