Does Curt Front Hitch for 2018 Toyota Tacoma TRD Require Air Dam Trimming

Question

Question:

I have a 2018 Tacoma TRD Off Road Pro pickup truck. With the Curt C31075 front tow hitch, how much of the skid plate will need to be modified?

asked by: Peter S

0

Expert Reply:

I checked with Curt and the Front Hitch for your 2018 Toyota Tacoma TRD # C31075 is a confirmed fit and there are no notes in the install instructions that indicate that the skid plate would need to be removed or modified. The air dam needs to be trimmed but not the skid plate. The only model that would require further modifications that we've seen so far is the TRD Sport models.

expert reply by: Jameson C

0

Answer 1

I checked with Curt and the Front Hitch for your 2018 Toyota Tacoma TRD #C31075 is a confirmed fit and there are no notes in the install instructions that indicate that the skid plate would need to be removed or modified. The air dam needs to be…

view full answer...

Answer 2

Due to the way the 2020 Toyota Tacoma is designed, any front mounted hitch would require some kind of alteration to the front air dam. Out of the options though, I believe the least intrusive front hitch is the Curt Front Mount Trailer Hitch Receiver…

view full answer...

Answer 3

The best front mount hitch available for your 2019 Toyota Tacoma TRD is the Curt #C31075. This particular hitch will still require you to trim the skid shield to allow for the needed clearance but unlike the Draw-Tite alternative it will allow you to…

view full answer...

Answer 4

When installing Curt front mount receiver #C31075 it is just the air dam that will need to be trimmed on the 2016 Toyota Tacoma. I have included a picture that shows where the trimming needs to occur. I have also linked the instructions for you.

view full answer...

Answer 5

The easiest to install front mount trailer hitch for a 2018 Toyota Tacoma is the Curt Front Mount Trailer Hitch Receiver part #C31075. It will take less time according to the manufacturer and there is far less hardware involved. I also like Curt more…

view full answer...

Answer 6

I may have a solution for you but I'm not aware of a bolt on safety chain bracket or clevis that can be used. However you can simply take a safety chain set (or your existing chains) like the 42" Long Safety Chain with 3/8" Clevis Hook…

view full answer...

Answer 7

I checked with Curt for you, the Curt Front Mount Trailer Hitch Receiver part #C31075 is a confirmed fit for a 2023 Toyota Tacoma all models including a TRD Off-Road. This front mount hitch will be a great addition to your Tacoma allowing you to do a…

view full answer...

Answer 8

For your 2019 Toyota Tacoma the only front hitch we offer has tow hooks on them, the Curt #C31075.

view full answer...

Answer 9

The Curt Front Mount Trailer Hitch Receiver part #C31075 when paired with the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles #BDW20011 is a great option for a 2017 Toyota Tacoma and will work well with the Warn VR EVO 10S Winch. In…

view full answer...

Answer 10

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part #65070 is a confirmed fit for your 2009 Toyota Tacoma 2WD. It is also a custom fit so no drilling into the frame is required. I have attached an install video of this hitch as well as a photo…

view full answer...

Answer 11

The return line when using a snatch block on the Curt Front Mount Trailer Hitch Receiver part #C31075 for a 2023 Toyota Tacoma should be attached to the tow hooks on the vehicle, not the loops on the receiver per the instructions. The hitch as you…

view full answer...

Answer 12

For your 2021 Toyota Tacoma the front hitch I recommend is the Curt #C31075 which has the best ground clearance and is tucked up nicer under the front bumper compared to other options.

view full answer...

Does Curt Front Hitch for 2018 Toyota Tacoma TRD Require Air Dam Trimming

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching