Front Hitch Recommendation for 2021 Toyota Tacoma

Question

Question:

What front mount hitch should I get for my 2021 Toyota Tacoma?

asked by: Judy

0

Expert Reply:

For your 2021 Toyota Tacoma the front hitch I recommend is the Curt # C31075 which has the best ground clearance and is tucked up nicer under the front bumper compared to other options.

expert reply by: Jameson C

0

Answer 1

For your 2019 Toyota Tacoma the only front hitch we offer has tow hooks on them, the Curt #C31075.

view full answer...

Answer 2

When installing Curt front mount receiver #C31075 it is just the air dam that will need to be trimmed on the 2016 Toyota Tacoma. I have included a picture that shows where the trimming needs to occur. I have also linked the instructions for you.

view full answer...

Answer 3

The best front mount hitch available for your 2019 Toyota Tacoma TRD is the Curt #C31075. This particular hitch will still require you to trim the skid shield to allow for the needed clearance but unlike the Draw-Tite alternative it will allow you to…

view full answer...

Answer 4

We currently have two front mount trailer hitch receivers for your 2017 Toyota Tacoma which are Curt part #C31075 and Draw-Tite part #65070. Neither of them are designed to be used on vehicles that have be altered from stock but I do have way for you…

view full answer...

Answer 5

The return line when using a snatch block on the Curt Front Mount Trailer Hitch Receiver part #C31075 for a 2023 Toyota Tacoma should be attached to the tow hooks on the vehicle, not the loops on the receiver per the instructions. The hitch as you…

view full answer...

Answer 6

I checked with Curt and the Front Hitch for your 2018 Toyota Tacoma TRD #C31075 is a confirmed fit and there are no notes in the install instructions that indicate that the skid plate would need to be removed or modified. The air dam needs to be…

view full answer...

Answer 7

While we do have the Curt Front Mount Trailer Hitch Receiver #C31075 for your 2023 Toyota Tacoma TRD you are going to contact a local installer in your area for pricing on the installation. I have linked our installer locater near the bottom of the…

view full answer...

Answer 8

The Curt Front Mount Trailer Hitch Receiver part #C31075 when paired with the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles #BDW20011 is a great option for a 2017 Toyota Tacoma and will work well with the Warn VR EVO 10S Winch. In…

view full answer...

Answer 9

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part #65070 is a confirmed fit for your 2009 Toyota Tacoma 2WD. It is also a custom fit so no drilling into the frame is required. I have attached an install video of this hitch as well as a photo…

view full answer...

Answer 10

Out of the two front mount hitches for your 2019 Toyota Tacoma the Curt Front Mount Trailer Hitch Receiver item #C31075 is the best option for your application. It does require trimming of the front fascia and the skid guard if your model has one.

view full answer...

Answer 11

You actually will not loose any ground clearance with Curt front mount receiver #C31075 installed on your 2017 Toyota Tacoma. The receiver will not be lower than the lowest part of the front fascia on the truck. I have included a picture showing the…

view full answer...

Answer 12

We have two front-mount trailer hitches for your 2017 Tacoma. I called my contact at Curt and they said that when installing the #C31075 hitch the air dam will need to be trimmed as shown in the attached installation instructions. The photo on the…

view full answer...

Front Hitch Recommendation for 2021 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching