Curt Front Mount Trailer Hitch Installation - 2019 Toyota Sequoia Video

Starting with the tow hooks, those will remain on your 2020 Toyota Tundra when installing the Draw-Tite Front Mount Trailer Hitch Receiver #65080. They will be temporarily removed, but will be bolted back on. In regards to the hole, there is a small…

The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65080 is my recommendation for you based on cost and features. The installation of this hitch is nearly identical to the Curt #31198. The Draw-Tite has a measurement of 7-1/2…

Both the Draw-Tite #65080 and Curt #31198 front mount hitches can still be installed if your 2021 Toyota Sequoia has that front skid plate, but it does require removal and trimming during the installation. So it fits, it just doesn't fit right up…

According to Curt, if the truck is equipped with the skid plate, the skid plate will need to be removed or have the 4 inch diameter hole cut into it to allow for oil changes. The hitch cannot be removed each time the oil needs changing, because the…

The front mount trailer hitch options for a 2019 Toyota Tundra, the Curt Front Mount Trailer Hitch Receiver part #31198 or Draw-Tite Front Mount Trailer Hitch Receiver part #65080 will both work of TRD models. That said, you will either need to cut a…

Curt RV frame mount hitch #13703 has a tongue weight capacity of 350 pounds. So the Honda Ruckus would be fine but the Suzuki would be too heavy since you also have to factor in the weight of a carrier. With this hitch Curt also says you have to use…

For your 2018 Toyota Tundra the recommended front hitch is the part #31198 for use with the Agri-Cover SnowSport plow part A40000HD. You will need to enlarge a hole in the skid plate to allow the install of this hitch while also allowing easy access…

You should be able to reinstall your skid plate after installing the Curt Front Hitch #31313. On the older models (prior to 2007) the skid plate isn't required to be removed. The newer ones after 2007 do require the removal of it, but we had a…

The skid shield may need to be removed to install Curt front mount trailer hitch #31313. It might also be possible to trim it. The instructions do not mention the skid plate at all, see link to the right. You should not drill into or weld to the…

For a front mounted hitch that fits your 2009 Toyota Tacoma, go with an option from Curt: - Curt Front Mount Trailer Hitch Receiver #31313 I like Curt as they have, in my opinion, a deserved reputation for overall quality, and it's what I would…

According to Curt, the Curt Front Mount Trailer Hitch Receiver part #31198 is a confirmed fit for all models of the 2018 Toyota Tundra even ones with the technology package like yours. The hitch is very easy to install and will give you a 2"…

If you cut a hole in the skid plate of your 2019 Toyota Tundra when installing the Curt front hitch #31198 you would not be required to remove the hitch to change the oil. I attached a diagram that shows where to cut the hole for access.