Replacement Towing Mirrors For 2000 Chevrolet Silverado Without Heating Function

Question

Question:

My truck has the electric remote function, but does not have the heated function. I can do without the heated function as I live in the South, but will the trucks wiring plug fit the mirror plug as is? If not, would it be possible to take the plugs from the mirrors I am replacing damaged in a sideswipe and wire them onto the new mirrorsfoot pigtails to obtain just the remote function?

asked by: Wayne S

1

Helpful Expert Reply:

It may be possible to re-wire the K-Source Custom Extendable Towing Mirrors - Electric/Heat part # KS62139-40G however, it is not recommended or necessary because there are easier options.

I recommend to use CIPA Magna Custom Extendable Electric towing mirror part # CM70121 for the driver's side and part # 70120 for the passenger side. The CIPA mirrors are replacement mirrors for the 2000 Chevrolet Silverado that extend for towing. However, you may lose LED turn signals, automatic dimming, and puddle lights if you had those features but the mirrors will plug right into your existing wiring harness.

expert reply by: Heather A

1

Answer 1

I have a solution for you, but we're not going to have any replacement or towing mirrors with all of those functions available for your 2002 Chevy Silverado 2500 HD with a crew cab. With that said, there are a few different types of mirrors…

view full answer...

Answer 2

If your 2001 GMC Sierra 3500HD already has the heat function then yes, the heat function will work for the K-Source Custom Extendable Towing Mirrors #KS62139-40G. If your pickup doesn't have the heat function then this will not add that function…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The #TLC3205 you have now is only designed to work with the factory hitch. Whether it is the #DT45517, a Curt hitch, or even a TorkLift hitch you will need a different rear tie-down. The correct rear tie-down for a 2002 Silverado 2500 without a board…

view full answer...

Replacement Towing Mirrors For 2000 Chevrolet Silverado Without Heating Function

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching