How To Use Rhino-Rack Vortex Aero Crossbars with Rhino-Rack Gutter Mount Legs On a 2011 Ford Van

Question

Question:

Will this allow my Rhino Rack Gutter mount legs RL150S10 to mate with my Rhino Rack Aero bars RRVA180B-2? The order I received from etrailer with these items do not mate up unless this is what I need to adapt. If so, Ill order these also. Thanks,

asked by: Paul

1

Helpful Expert Reply:

In order to install the Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 on your Rhino-Rack Roof Rack Legs part # RL150S10 you will also need to use the RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars part # RRVA-FK1.

expert reply by: Conner L

1

Answer 1

The 65 inch long crossbars part #RRVA165-2 that you referenced would be long enough for the roof of your 2002 Ford Econoline and would work well with the Rhino-Rack Roof Rack Legs #RL150S10 that you also referenced. You would need to order a quantity…

view full answer...

Answer 2

The Rightline cargo bag, #RL100S20, should work just fine on your 2013 Toyota Venza. If you were to open the door, the clips would attach to the ridge directly above where the top of the door would be. Take a look at the picture I have linked. This…

view full answer...

Answer 3

You can install locks onto the Rhino Rack roof rack part numbers #RRVA165B-2, #RRRL150GMC-2, and #RRVA-FK1-2 that has been confirmed as a fit for you van, but you would need to buy that separately as part #RRVA-LEC4.

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...