What Size Bolts Come with Trailer Hitch # 13333

Question

Question:

Size bolts and what thread to use on bolting hitch to frame. Coarse, fine , metric thread? 2009 dodge ram 1500. Thank You.

asked by: Joe

0

Expert Reply:

The trailer hitch part # 13333 that you referenced is a confirmed fit for your 2009 Dodge Ram 1500 and comes with the needed carriage bolts which are 1/2-13 x 1 1/2.

expert reply by: Jameson C

0

Answer 1

I'm not sure what trailer hitch you have installed on your 2015 Ram 1500 but the etrailer.com Trailer Hitch #e98852 uses a 3/4-10 x 3.25 bolt while the Draw-Tite version #75662 uses a 3/4-10 x 3.5 bolt. This means that you need a 3/4-10 with…

view full answer...

Answer 2

The two 1/2" hex bolts that come with the Curt Trailer Hitch Receiver part #C13419 will require either a 3/4" or 19mm socket for installation.

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #76271 comes with 7/16" carriage bolts while the Curt Hitches #C13409 and #C47HR use 1/2" carriage bolts. All of these come with fishwire that matches the carriage bolt sizes so you…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…

view full answer...

Answer 10

Since your weight distribution hitch is working to keep your 2020 Ram 1500 level I recommend going for the lighter Blue #SSR-307-40 springs. These have the 1" spacer as well like the heavier Black #SSR-307-47 springs which you can take out or…

view full answer...

Answer 11

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 12

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

What Size Bolts Come with Trailer Hitch # 13333

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching