Is the Bulb Replacable on the Gustafson RV LED Ceiling Light w/ Shade # 277-000469-499

Question

Question:

WHAT IS THE PART NUMBER FOR THE LIGHT BULB?

asked by: RICK

0

Expert Reply:

I reached out to my contact at Gustafson and the LED bulbs that come on the Gustafson RV LED Ceiling Light w/ Shade # 277-000469-499 actually aren't replaceable so if for some reason they went out you'd need to replace the entire base with part # 277-000469. As far as the glass piece that fits over the LEDs goes, that unfortunately isn't available as a replacement part.

expert reply by: Jon G

0

Answer 1

I do have a solution, but unfortunately we do not have a 3,500 lb axle that matches the length of your current axle. What I can offer is the Timbren Axle-Less Trailer Suspension System #ASR3500S05. This system will fit any frame width so it will work…

view full answer...

Answer 2

I do have a potential option for you, however the Gustafson RV LED Ceiling Light #277-000469-499 that you referenced doesn't have an adjustable base that allows the light to sit level when mounted to a slanted ceiling like what's on your…

view full answer...

Answer 3

In regards to the Gustafson RV LED Ceiling Light part #277-000469, the glass shade is not included but we do offer this with the Gustafson Shade for RV Ceiling Light part #277-000499 which is the only available option.

view full answer...

Answer 4

After a bit of cross referencing I found that you have the Kwikee 32 series steps, and they were manufactured in 2005, so the correct motor is the Replacement Motor for Kwikee Electric RV Steps #LC379147. If you are needing more than the motor, the…

view full answer...

Answer 5

It's definitely possible to upgrade a trailer's axle rating to a higher rating by just swapping the axles. To pick out the correct axle you'll need to measure the distance between the hub faces and the spring seat centers and you'll…

view full answer...

Answer 6

It sounds to me like your control module could be failing but I recommend first checking your power to ensure that you're actually getting 12v at the steps and then checking to make sure the ground hasn't been compromised. A lack of power or…

view full answer...

Answer 7

It's very common for RV bumpers to really only be there for cosmetic looks while having no real load bearing capacity so if your trailer's manufacturer states not to attach things to the bumper then you should follow their support. Since you…

view full answer...

Answer 8

With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers #e96ZR. Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper…

view full answer...

Answer 9

Email me back with the picture you have and I'll take a look.

view full answer...

Answer 10

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

view full answer...

Answer 11

I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't really designed to have the bulbs replaced.…

view full answer...

Answer 12

The 24x60 etrailer Cargo Carrier for RV Bumper #e99049 is a great option for a cargo carrier for use with an RV. It fits 4" x 4" and 4-1/2" x 4" RV bumpers and can hold up to 500 lbs. As long as the bumper on your Grand Design…

view full answer...