Review of MORryde RV Cargo Slides - Sliding Generator Tray - MR89RR Video

The MORryde RV Generator Slide Out Tray #MR89RR has internal tray dimensions of 17-1/2" long, 20-3/8" wide, and the sides are 2-3/4" tall. Your Predator generator shows the measurements at the widest points at…

The MORryde RV Generator Slide Out Tray #MR89RR that you referenced has specific instructions from MORryde that you can't operate a generator when it is sitting on the tray. Even if it was locked in out position.

The male thread of the Replacement Adapter Fitting #T4871700 being longer would not be an issue when installing it in the back of the Dexter actuator part #K71-650. Pressure from the male side flare fitting to the actuator is what seals it so the…

I checked with GEN-Y and they were able to get me the distance from the top bolt hole of the #GY48GR down to the bottom of the coupler which you can see in the attached picture as well as a few other dimensions. It's 23.8 inches. It does not…

For your application you'll need the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR which is designed to fit as a replacement for the unique bolt pattern of the Lippert Turning Point pin box. Reese currently (April 2022)…

I have a couple solutions for you and yes there is a goose box that will work with your Lippert Turning point pin box. It is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert Turning Point - 21K - 3.5K TW item #GY48GR. You can…

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR is the only gooseneck pin box that fits the mounting points for the Lippert Turning Point(657275) you have. It is rated for trailers up to 21,000lbs with a tongue weight of…

The tongue of the trailer needs to be above the bed rails so that the trailer can turn correctly when making turns and going over bumps to clear the truck. I will attach a photo to help explain the clearances needed for your trailer.

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR will fit in place of your Lippert Turning Point pin box, yes. The pin weight range of this pin box is 1,501-3,000 lbs which should be right about in your wheelhouse - I do…

Thanks for the picture and the extra information. I just heard back from my rep at Lippert and it looks like your Grand Design Reflection has a Turning Point pin box with a 16,000 lbs capacity. To replace it with a goosebox you will want the Gen-Y…

Congrats on the new trailer and thanks for the picture and extra information! I just spoke with my rep at Lippert and it looks like your Jayco Eagle has a Lippert Turning Point which limits your options. The only gooseneck to 5th wheel adapter for…

The only replacement option for a Lippert Turning Point Pin Box is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. There is nothing else available to match the bolt pattern. The MORryde Cushioned 5th Wheel Pin Box item…