Weight of Draw-Tite Trailer Hitch for 2019 Toyota RAV4

Question

Question:

Could you tell me what the weight is for this item? Thank you!

asked by: Robert A

1

Helpful Expert Reply:

The Draw-Tite hitch that fits your 2019 Toyota RAV4, part # 36675, weighs a little over 20 pounds.

I've linked an install video and the install details for you to take a look at. If you let me know what you're looking to use the hitch for I can make some additional recommendations for you.

expert reply by: Charles S

1

Answer 1

The hitch receiver with the best ground clearance and least conspicuous presence, for your 2021 Toyota RAV4, is going to be the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" item #EH97FR. This hitch has a completely hidden…

view full answer...

Answer 2

As far as 2-inch hitches that are available for your 2021 Toyota RAV4, the hitch that has the greatest ground clearance is the etrailer Trailer Hitch - 2" #e23ZR. It has a ground clearance measurement of about 10-1/4 inches. We haven't had a…

view full answer...

Answer 3

The best trailer hitch receiver for carrying bikes that fits your 2021 Toyota RAV4 Limited Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The reason for that is because it has the best ground and bumper clearance for a bike rack…

view full answer...

Answer 4

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...