Are the Firestone Coil-Rite Air Helper Springs F4118 A Confirmed Fit for a 2016 Nissan Pathfinder

Question

Question:

Ive looked at the manual guide and the coil doesn't seem to make contact at the bottom of the suspension table. It says to push it up in the coil... Is there any other option for a Nissan pathfinder 2016 ? We haul a travel trailer about 400 pounds tongue weight and the truck sags a lot. Thank you.

asked by: Sebastien M

0

Expert Reply:

The Firestone Coil-Rite Air Helper Springs part # F4118 is a confirmed fit for your 2016 Nissan Pathfinder and the only option of its kind that we have for you. The air bag works by expanding which then limits the amount that the coil springs can compress. This will then reduce sag once a heavy load is applied. In order to install them you basically fold the bag and then slip them though the space in the coils. The bag does not need to extend the length of the entire coil, there can be extra space on top, on bottom, or both and it will still work as normal.

expert reply by: Conner L

0

Answer 1

The distance from the center of the hitch pin to the closest edge of the Curt Cargo Carrier part #C18113 is 6 inches. You'd have to measure from the center of your hitch pin hole out to the furthest point out on the bumper to know if this will…

view full answer...

Answer 2

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…

view full answer...

Answer 3

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…

view full answer...

Answer 4

I have a solution for you but I don't have any options for heat shields to protect your cargo when mounted on the Flint Hill Goods Cargo Carrier item #FHG27ZR. This will be an issue with any cargo carrier or accessory you mount on your Forester…

view full answer...

Answer 5

To my knowledge, none of the manufacturers offer cargo carriers in any finishes other than paint or powder coat. I would recommend getting this aluminum carrier #C18113.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

All 2020 Nissan Pathfinders come from the factory prewired for a brake controller and a 7-way trailer connector, though it might lack the 7-way and the relays needed to activate the tow package. You will need a brake controller. If your vehicle…

view full answer...

Answer 8

We do have a suspension enhancement solution that will work with your 1998 Toyota Sienna. I'd recommend the Firestone Coil Rite Air Helper Springs, part #F4118. The nice thing about an air system is you can tailor the firmness of the suspension…

view full answer...

Answer 9

For your 2022 Ram 1500 I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle #AL88375. The LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of…

view full answer...

Answer 10

The EcoHitch Hidden Trailer Hitch item #EH35VR you were looking at is the only hitch available for your 2023 Highlander Hybrid that is compatible with a 20" spare. This hitch is custom fit and bolts to your Highlander with included hardware. I…

view full answer...

Answer 11

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 12

The Coil SumoSprings Custom Helper Springs part #CSS-1125R are the perfect option for a 2004 Honda CR-V. They are super easy to install (no tools required) and will do a great job of helping transfer weight from the rear to the front axle which will…

view full answer...