Will Reese Fifth Wheel Hitch Fit in Rails of Curt Rail Kit # C16418-204

Question

Question:

I have an older Reese hutch will it fit on these rails

asked by: Aaron Y

0

Expert Reply:

Yes, your Reese hitch will fit in the rails that come with the Curt rail kit part # C16418-204 that you referenced. This rail kit provides industry standard fifth wheel rails like what your Reese hitch was designed to fit.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 2

The best type of truck to pull a larger 5th wheel trailer such as a 39-foot Jayco is a 1-ton long-bed. Long beds avoid the issue of too little turning clearance and 1-tons will have the power needed to pull a heavy trailer without strain. They also…

view full answer...

Answer 3

Yes, your Reese fifth wheel hitch like the part #RP30047 will work with the Curt fifth wheel rail kit part #C16418-204 that you referenced. This rail kit provides the industry standard rails which is what the Reese hitch is designed to fit. I…

view full answer...

Answer 4

There can be differences in base rail installation bolt patterns between manufacturers so it is important to make sure that you get some that are compatible. From the dimensions that you gave in your picture it looks like the previous owner had a…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 8

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 9

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 10

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 11

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 12

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Will Reese Fifth Wheel Hitch Fit in Rails of Curt Rail Kit # C16418-204

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching