Trailer Wiring Harness Fit For 2010 VW Jetta SportWagen TDI

Question

Question:

2010 jetta sportwagen tdi will this harness fit this particular model? Thank you

asked by: Robert M

0

Expert Reply:

We do have a wiring harness fit for your 2010 VW Jetta SportWagen TDI, and the correct fit is a hardwire option, which is the following part

- Curt Vehicle Wiring Harness # C59236

expert reply by: Kyle S

0

Answer 1

The information that step 1 is referring to is actually right there below it. You will have to determine if your 2013 VW Jetta SportWagen is a 2 or 3 wire system based on the definitions in the instructions below step 1. I found that your Jetta…

view full answer...

Answer 2

For your 2013 Volkswagen Jetta SportWagen I recommend the Curt Wiring Harness part #C59496. This harness would work very well for you. I attached an install video for this wiring kits on similar vehicles as yours for you to check out also.

view full answer...

Answer 3

Yes, you are correct that Tow Ready wiring harness #118667 is intended for only the 4-door sedan versions of the Jetta. For a 2009 VW Jetta Sportwagen TDI Tow Ready does not offer a wiring harness. However, Curt does have 4-pole wiring kit #C59236…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Trailer Wiring Harness Fit For 2010 VW Jetta SportWagen TDI

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching