Will Fastway e2 Weight Distribution Work For 2019 Coleman Light LX 1605FB Travel Trailer

Question

Question:

I have a 2019 Toyota Tacoma V6, have a 2019 Coleman Light LX 1605FB TT. Trailer weight 3550 empty, tongue weight 359 lbs. I need to purchase a system for this Will this system work for a 2019 Coleman Light LX 1605FB TT???

asked by: Joseph J

0

Expert Reply:

The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-0800 is a great option for your 2019 Coleman Light LX 1605FB, and I'll explain why.

The ideal weight distribution with sway control system will be one in which your total tongue weight falls somewhere in the middle of the weight distribution system's tongue weight capacity. Total tongue weight (or TTW for short) is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle.

So for your 2019 Coleman Light LX 1605FB, with a 3,550 lb empty weight and 359 lb empty tongue weight, a good estimate for its loaded tongue weight is in the 475 lb range. Even if you have no weight behind the rear axle of your 2019 Tacoma, or 100 lbs of cargo behind the rear axle of your truck, the Fastway e2 Weight Distribution # FA94-00-0800 will be perfect because it has a tongue weight capacity between 400 lbs and 800 lbs.

This system comes with all the parts you need to install it; you only need to get a hitch ball, likely the 2" Hitch Ball # EQ91-00-6080 though there is also a 2-5/16" Hitch Ball # EQ91-00-6100. Additionally, I recommend using thin-walled socket # EQ70-00-4800 to help install the hitch ball.

I have added links to video reviews for you to take a look at as well.

expert reply by: Kyle S

0

Answer 1

The key to choosing a weight distribution (WD) system is to know your trailer's actual fully-loaded tongue weight (TW) just as it will be when you head out. To this you need to add the weight of anything in the truck bed that sits behind the rear…

view full answer...

Answer 2

I recommend the Equal-i-zer Weight Distribution System #EQ37060ET for your 2023 Scamp 16 travel trailer. The Equal-i-zer weight distribution hitches have been around for a long time and are the ones everyone else tries to compare themselves to. This…

view full answer...

Answer 3

A weight distribution system is always recommended if the weight of your trailer is more than 50 percent of your tow vehicle's weight. Since the small camper you are towing has a GVWR of 3,000 lbs and a 2017 Toyota Tacoma weighs around 4,000 lbs,…

view full answer...

Answer 4

When picking out a weight distribution system, the most important factor to consider is the total tongue weight of your setup. This number includes both the loaded tongue weight of your trailer (as if loaded and ready for a trip), along with any…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Will Fastway e2 Weight Distribution Work For 2019 Coleman Light LX 1605FB Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching