Will Pullrite Superglide 2700 Fit Reese Rail Kit # RP56015-53 For 2019 Chevy Silverado 1500

Question

Question:

Just checking if you know these rails will fit with the Pullrite Superglide rail mount hitches...I beleive its a model 2700. Thank You

asked by: Bob A

0

Expert Reply:

The Pullrite Superglide 2700 hitch is designed to fit industry standard fifth wheel rails like what the Reese kit part # RP56015-53 you referenced provides. So if this is the hitch you have then this rail kit will fit and work well. Some of Pullrite hitches will only fit their rail kits so you'll need to verify for sure what hitch you have.

expert reply by: Jameson C

0

Answer 1

The correct B&W Custom Installation Kit for your 2019 Chevrolet Silverado 1500 is indeed part #BWRVK2504 which will work with your Pro Series 16K Slider 5th Wheel Hitch. The B&W Custom Installation Kit does not require any drilling…

view full answer...

Answer 2

The Reese Quick-Install Custom Outboard Installation Kit #RP56015-53 and B&W Custom Installation Kit #BWRVK2504 are a fit for your 2022 Chevy Silverado 1500 and will fit with the Pro Series 15K Slider, yes. These bracket kits have a slight…

view full answer...

Answer 3

The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches Item #BWRVK2504 are a custom fit for your 2019 Chevy Silverado 1500 and are an industry standard rail so you should have no issues attaching your PullRite Superglide…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 8

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 11

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...