Trailer Hitch for 2018 Mitsubishi Outlander PHEV

Question

Question:

Does it fit on 2018 Mitsubishi outlander phev?

asked by: Claude S

0

Expert Reply:

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is # C13398. This will work well for bike racks and other accessories.

If you will be towing, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT that will not require any splicing into your vehicle wiring. The zero contact interface sensors will work well to give you the trailer towing functions you need.

I recommend using the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900 for a ball mount. I recommend following the towing capacities in your owner's manual.

expert reply by: Jason S

0

Answer 1

The only part of the Curt Trailer Hitch Receiver part #C13398 that will be visible once installed on your 2018 Mitsubishi Outlander PHEV will be the receiver tube opening. Therefore, the majority of the hitch will actually be hidden. I do have an…

view full answer...

Answer 2

The Curt 56412 is indeed the same as the Curt T-Connector Vehicle Wiring Harness #C77KR, and does fit your 2020 Mitsubishi Outlander PHEV. It is is the correct harness if you have the factory tow package, otherwise you will need a splice-in harness:…

view full answer...

Answer 3

As long as your Outlander isn't the plug in hybrid (PHEV), I'd recommend the #118482 for vehicles without the factory tow package or #118277 for vehicles with the tow package. If your vehicle has the tow package, it will have the tow package…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...