Best Trailer Hitch for a 2018 Jeep Wrangler JL Unlimited

Question

Question:

What is the best hitch for the newer 2018 JLU?

asked by: Lou B

0

Expert Reply:

The best trailer hitch for your 2018 Jeep Wrangler JL Unlimited is the Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR because it has a higher weight rating than the other trailer hitches available (indicating a stronger construction), has a longer receiver to help accessories clear your spare tire, and features safety chain loops that remain under your rear bumper for a clean look after the installation. I have attached pictures and an installation video for you to reference.

For a towing application you would need the Curt T-Connector # C56407 4-Way Flat wiring harness and a ball mount. I recommend checking out the etrailer.com Ball Mount Kit # 989900 but you will want to reference the linked ball mount article to ensure that the 3/4" rise/2" drop or 2-3/4" rise/4" drop ball mounts are correct for your towing setup. An installation video of the Curt wiring kit has been linked for you to reference as well.

If you plan on carrying some bikes then I highly recommend using the RockyMounts BackStage # RKY10002 because it is a platform style bike rack that secures bikes by the wheels which makes it compatible with any bike frame style that doesn't have a front fender. The best feature on this rack is the swinging arm that allows you to keep your bikes loaded and swing the carrier out of the way for complete rear hatch access (see attached review video).

expert reply by: Jon G

0

click to enlarge

Answer 1

Yes, the installation of a trailer wiring harness will be different for a 2019 Jeep Wrangler MOAB when compared to a 2013 Jeep Wrangler MOAB but not by much. Instead of just plugging in one connector behind the driver side tail light you will need…

view full answer...

Answer 2

Per the instructions which are linked for your convenience, the bolts for the Draw-Tite Max-Frame Trailer Hitch Receiver #75876 should be torqued down to 50 lb.-ft. This trailer hitch is a confirmed fit for your 2018 Subaru Forester and I have…

view full answer...

Answer 3

I was able to find that your 2003 Chevy Silverado with a Duramax diesel engine has a towing capacity of 12,000 lbs.

view full answer...

Answer 4

The Curt hitch part #13432 that you referenced has a shorter hitch tube than the Draw Tite part #DT78MR. Basically that means that the Curt hitch would be more recessed under the vehicle. While this may be more aesthetically appealing it also makes…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...