bing tracking image
Q & A Icon

Installing Furrion Side Marker Light with Camera on 2019 Momentum 351M  

Question:

Furrion side marker cameras install on my new 2019 Momentum 351M I have coming out of old light a pair of white wires and a pair of White wire with green strip . The Furrion marker has a black wire , red wire and brown wire ....do I wire the white wires with the black and red then brown to white green stripe ?

0

Expert Reply:

The Furrion Side marker lights with camera # FCE48TASL you will have the running light wire (brown) camera power (red) and ground (black). Because it sounds like you have two sets of wires, it is likely one set is running light power and the other is the ground. You can use a circuit tester like # PTW2993 to determine function. Once you have done so, the brown and red wires connect to the running light power and the black will connect to ground. This will give you camera power as long as your running lights are on.

I've attached a couple videos to assist.

expert reply by:
0
Jason S
click to enlarge

Craig Y.

5/28/2020

Jason, WOW Thanks for this info, education, life saver. I have been trying for over a week to figure out what you described above. I got the 3 cameras up and running (there was no ground on one of the side markers

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>