Replacement Motor and Gearbox for Lippert Electric Ground Control TT Leveling System

Question

Question:

Can I purchase the motor and gear box separate from the leg?

asked by: Gary H

0

Expert Reply:

Yes, the correct replacement motor and gearbox for the c-jacks on the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System part # LC672136 is the Replacement Motor and Gearbox for C-Jack for Lippert Components Electric Ground Control TT part # LC656216. This unit comes with both the motor and gearbox already attached.

expert reply by: Conner L

0

Answer 1

The Replacement Stabilizer Motor and Gearbox for Lippert Components Ground Control TT Leveling System #LC656216 or the Replacement C-Jack for Lippert Components Electric Ground Control TT #LC404488 are the replacement parts available for your…

view full answer...

Answer 2

We have the part number you are looking for with #LC404488 which gives you the replacement leg and motor you are looking for. Based on what you described experiencing this is the correct solution for your problem as well.

view full answer...

Answer 3

If you get the Out of Stroke error message on the Lippert Ground Control system, such as #LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. To clear the error you can extend all of the jacks in…

view full answer...

Answer 4

The Out of Stroke error message on the Lippert Ground Control system, such as #LC358590 indicates the jack has extended as far as it will go and has maximized it's extension. To clear the error you can extend all of the jacks in the system…

view full answer...

Answer 5

I'd try a reset first. To manually reset your Lippert Ground Control part #LC358590 you need to hold down the retract and enter buttons at the same time. Try that but if you still get an error code you most likely have a low voltage battery…

view full answer...

Answer 6

To manually reset your Lippert Ground Control part #LC358590 you need to hold down the retract and enter buttons at the same time. Try that but if you still get an error code you most likely have a low voltage battery that needs to be charged. Or…

view full answer...

Answer 7

Assuming that you have the Lippert Ground Control 3.0 stabilization system you can replace your current rear jacks with the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 as they will be a…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...