Why Dont Side Marker Clearance Lights Come On When Installing Diode Tow Bar Light Kit on Vehicle  

Excellent! We have just the thing. For a permanently installed system I recommend the Roadmaster invisibrake #RM-8700. This will be tied into your RVs brake light signal and will activate every time the brake lights illuminate. The actuator box…

I cannot tell you the exact "influencer" as you referred to it as but while the vehicle is setup for flat-towing, the brake light switch will shut off after 10 minutes of inactivity. If you open or close the door that will then wake the…

No, the brake light relay Item #RM-88400 is not used for the 2021 Jeep Wrangler Unlimited because the brake wire cannot be spliced into. Instead you would want to use the Roadmaster Stop Light Switch Kit Item #RM-751490. Now you would only need this…

The Roadmaster Brake-Lite Relay #88400 that you referenced actually isn't needed for your 2020 Jeep Wrangler Unlimited with the push button start. In order to ensure proper operation of the signal lights and braking system you instead need the…

The stop light switch circuit on your 2018 Jeep JL Wrangler Unlimited will go dead while the vehicle is in tow therefore, you will need to use the Roadmaster Stop Light Switch Kit part #RM-751490, not the Roadmaster Brake-Lite Relay Kit for Towed…

The Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 is not needed for your 2021 Jeep Wrangler. This is due to the brake wire being unable to be spliced into. Instead, you'll want to use the Roadmaster Stop Light Switch Kit #RM-751490…

The Roadmaster Stop Light Switch Kit #RM-751497 is the correct switch for your 2022 Jeep Gladiator. The Kit #RM-751490 you found is for the Jeep Wrangler JL.

To install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 on your 2022 Jeep Wrangler Limited Sport, you will start by: 1. Start by confirming that you have the right wire, you 'll want to confirm this by using a multimeter like…

You are correct in that the #RM-88400 brake light relay will not work with the JL wranglers. This circuit you would need to connect one is not accessible. You are also correct that the brake light switch will shut off after 10 minutes of inactivity.…

The problem with the 2018 Jeep JL Wranglers is that the circuit you need to install the brake light relay #RM-88400 is inaccessible but it isn't required on this vehicle. When your JL Wrangler is set up in flat tow mode (see owner's manual)…

The Roadmaster Brake-Lite Relay Kit #RM-88400 actually isn't needed on your 2019 Jeep JL Wrangler. Instead what you need to ensure that your lights are working is a stop light switch. We have the Universal Stop Light Switch Kit #RM-751000 or the…

To determine if you need the Roadmaster Brake Lite Relay part #RM-88400 you'll need to first put your 2020 Jeep Wrangler in ignition position that it needs to be in when towing (check owners manual) and then check to see if the brake lights of…