Electric Brake Hubs For M105A2 Military Trailer With 6 On 5 1/2 Inch Bolt Pattern
Question:
Do you know if there is a 6x5.5 electric brake hubs that can replace the pneumatic brake hubs on my M105A2
asked by: Hans H
Helpful Expert Reply:
I can help you find electric brake hubs for the M105A with a 6 on 5-1/2 bolt pattern. The bearings that come with the hubs fit the spindle based on the capacity of the axle on the M105A.
From my research the M105A2 either uses a 5200 lb or 6000 lb axle. I recommend trailer hub and drum assembly part # AKHD-655-6-K. This hub and drum comes with inner bearing part # 25580 and outer bearing part # 15123. It fits a 12 inch diameter brake assembly. You do want to check your existing bearings for their bearing numbers. There should be bearing numbers stamped on the side. If there is not numbers stamped on the side you can measure the bearing with a digital caliper like part # PTW80157. The inner bearing of the hub I recommended measures 1.378 inches and the outer bearing measures 1.063 inches.
If your M105A2 happens to have a 3500 lb axle, I recommend hub part # AKHD-655-35-K. This hub is made for 10 inch diameter brake assemblies. It comes with the inner bearing of # L68149 and outer bearing # L44649. These bearings are common for a 3500 lb axle. If you happen to find out the axle is 3500 lbs and the existing hubs are 10 inch diameter then these hubs are what you need.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Q&A: Converting Military M105A2 Trailer From Air Over Hydraulic Brakes to Electric Over Hydraulic Brakes
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: Brake Controller
- Video: Performance Tool Carbon Fiber Digital Caliper Review
- Q&A: Is it Possible for 1984 Parkhurst M105A2 Cargo Trailer to Convert to Electric Over Hydraulic
- Q&A: Recommended 7,000 lb Axle with Brakes for M105 Military Trailer
- Shop: Demco Hydraulic Brake Actuator - Drum - Primed - 8" Adjustable Channel Up - 8,000 lbs
- Shop: Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Converting Military Trailer Air Over Hydraulic Drum Brakes to Electric Over Hydraulic
- Q&A: Recommendations For Converting To Electric Brakes On A M105A2 Trailer
- Q&A: Recommended 5200-6000lb Axle For M105 Military Trailer Being Converted To Overland Trailer
- Shop: Vehicle Tow Bar Brake System
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: Converting M105A2 Military Surplus Cargo Trailer to Electric Drum Brake Operation
- Shop: Suspension Enhancement
- Article: Adding Electric Over Hydraulic Disc Brakes
- Video: Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25848B Review
- Video: Timbren Trailer Axles - Rubber Spring Suspension - TASR5200S03 Review
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2017 Chrysler Pacifica
- Search Results: maxxfan
- Search Results: breaker
- Search Results: 7 pin wiring
- Search Results: 15" wheels
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Chrysler Pacifica