Cushioned Equalizer Compatibility with Tandem 3,000 lb Axles

Question

Question:

I have a travel trailer with tandem 3000 lb Dexter axles spaced 35 center to center. The dry wight is 4700 lbs, Will this equalizer work with this trailer?

asked by: Edward C

0

Expert Reply:

The Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs # K71-653-00 will most likely fit your assembly but may not offer as much cushion as desired for your small axles.

You may instead want to consider the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K # LC279687 or the E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers # K71-652-00. These systems do have equalizers that adjust from 5-1/4 inches to 6-1/4 inches instead of the 7-3/4 inches, so longer shackle straps or springs may be needed for your axle spacing. If you measure your equalizer from center of bolt to center of bolt at the outer edges you will determine the fit needed.

I've attached an article to assist further.

Your other option is to add shocks like the Lippert Components Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle # LC281255 to assist with shock absorption. I've attached a video to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Lippert lift kit part #LC425750 that you referenced is a single axle lift so it would not work on your 2016 Coachman Apex Ultra Light 269RBSS as it is a tandem axle trailer. For a tandem axle lift kit the part number you'd need is the…

view full answer...

Answer 2

With your axles having a 33 inch wheel base and 5,200 pounds of capacity, we definitely have a couple options available. Both of these options will definitely work with your 33 inch wheel base and can be used with 5,200 pound axles. The first will…

view full answer...

Answer 3

To know if the Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000lbs #K71-652-00 will fit your 2017 Coachmen Apex UL 275BHSS travel trailer you'll just need to measure the distance from center hole to center hole of your…

view full answer...

Answer 4

Thank you so much for the photo with the dimensions it was very helpful. And based on the measurements you gave, I do recommend using slightly longer shackle straps with the Equa-Flex Cushioned Equalizers #LC279687. What I recommend is the…

view full answer...

Answer 5

The shackle bolts are usually either 9/16" diameter or 9/16" diameter with a step down to 7/16". That said, if you're just measuring with a ruler or tape measure then that's your problem as a 9/16" bolt doesn't measure…

view full answer...

Answer 6

I attached a picture that shows the proper position of shackles and equalizers on trailer suspension. Sometimes the shackle will flip up but if you jack up the trailer by the axle that's got the shackle flipped you can usually get it to flip back…

view full answer...

Answer 7

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Cushioned Equalizer Compatibility with Tandem 3,000 lb Axles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching