Does Curt Double Lock, Flip and Store Underbed Gooseneck Hitch Come with Hitch Ball

Question

Question:

IS THE BALL INCLUDED?

asked by: FRANCISCO

0

Expert Reply:

Yes, the gooseneck hitch ball does come with the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C607-604 that you referenced. I attached a review video that shows what it comes with as well as an install video link for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with…

view full answer...

Answer 2

If you check out the video I attached below you'll see an install we did for the Demco rail kit part #DM8551010 on a 2016 Chevy Silverado 2500HD just like yours. This will walk you through the entire process and will be more helpful than…

view full answer...

Answer 3

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000 lbs #DM8550035 is not compatible with the B&W turnoverball gooseneck hitch #BWGNRK1314. The handle for the gooseneck ball will not work with the…

view full answer...

Answer 4

It sounds to me like the gears of the slider inside of your Replacement Head and Base Assembly for Demco Hijacker Autoslide 5th Wheel Trailer Hitches #DM6077 may either have debris blocking them, the teeth may be chewed up and need to be replaced,…

view full answer...

Answer 5

You are correct. With the Demco Hijacker part #DM8550034 that you referenced you would not need to buy an adapter to connect the head of the hitch to the pin box of your trailer like what the PullRite hitches require. The rail kit you would want is…

view full answer...

Answer 6

If you have been upkeeping with the care and maintenance on your 18K Demco Hijacker Autoslide #DM8550034 it sounds like you might need to mess with the gear adjustment bolt located on the cab-end of the Hijacker. To do this you need to place the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 11

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Does Curt Double Lock, Flip and Store Underbed Gooseneck Hitch Come with Hitch Ball

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching