Review of Demco Fifth Wheel Hitch - Replacement Side Plates - DM6003 Video

The Demco part #DM6107 is the head and base for the Hijacker Autoslide with a 21k capacity. To attach this to a set of above bed fifth wheel rails you would need the part #DM6003. Then for a set of above bed rails that fits your 2012 Chevy…

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully…

Yes, you can remove the side brackets of your Demco Hijacker #DM8550034 and install the brackets part #DM49GV and the hitch will fit directly to the OEM pucks of your 2020 GMC Sierra 2500 short bed. This would allow you ability to not have to use…

The Demco #DM6107 only includes the hitch head and base assembly while the #DM8550035 is the entire hitch which also includes the side plates necessary to attach to industry standard bed rails such as those provided by the rail adapter for the puck…

The Reese Goose Boxes like the 20K Air Ride #RP85FR referenced in your question are pin box specific. This means they are designed to replace specific pin box models on the trailer so you will want to first make sure that it will be compatible.…

Yes, the Demco Autoslide part #DM8550034 that you referenced does fit the same rails that your current Reese hitch fits so this hitch will fit and work great. Above bed, or industry standard rails are thankfully made to same dimensions between…

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The only difference between the Demco Hijacker Autoslide 18k #DM8550024 and the 21k #DM8550037 is the base assembly. Both use the same head, but the base is what gives each hitch its rating. To change the 18k to 21k you would need the 21k base and…

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299 feature air springs that can be adjusted from 5 psi to 100 psi. There isn't a specific inflation level that is recommend for your 13,000 pound 5th Wheel Trailer because it will…

The Demco Hijackers like the #DM8550024 do have locking plates on the sides of them to prevent having to use a capture plate for most fifth wheel pin boxes but the MORryde pin boxes have a cut out area on the sides of the pin box to allow for the…

The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2505 are rated for 18,000lbs.