Tonneau Cover Recommendation for 2019 Toyota Tacoma Long Bed that Can Have Roof Rack Installed

Question

Question:

I have Retrax PowertraxPro XR tonneau cover on my 2019 Toyota Tacoma TRD and I would like to know if this products work?

asked by: David T

0

Expert Reply:

The only tonneau cover we have for your 2019 Toyota Tacoma long bed that can have the Rhino Rack roof rack part number # RRVA180B-RRRLT600 installed is the Pace Edwards UltraGroove part # 311-KMTA09A37.

There isn't a way to install the rack on a Retrax PowerPro XR as there isn't a channel system.

expert reply by: Jameson C

0

Answer 1

What I would do is go out to your truck and measure out 71 inches and 65 inches on a tape measure and compare that to the width of your bed. If you think the 71 inch looks better and would suit your needs then that's what you would want to go…

view full answer...

Answer 2

Hey Parvez, glad I could help! So the Rhino Rack Vortex Crossbars for Retrax XR tonneau covers part #RRVA180B-RRRLT600 was designed specifically to work with your RetraxOne XR tonneau cover so it is going to definitely have enough clearance above…

view full answer...

Answer 3

I'd be happy to recommend a cargo carrier to fit with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 on your 2022 Ford F-250 Super Duty! I really like the 53" x 49" Yakima OffGrid…

view full answer...

Answer 4

We do have the parts needed for a Thule Wingbar EVO to fit the slots of a Retrax cover but not as a complete kit. Here's what you'd need: 60" WingBar Evo Crossbars - #TH711520 Evo Clamp Feet - #TH710501 Fit Kit - #TH29TX Lock Core Kit -…

view full answer...

Answer 5

The most cost effective Rhino-Rack setup for a Rextrax XR Tonneau Cover is the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part #RRVA180B-RRRLT600. If you're interested in the ProBar Evo, that is…

view full answer...

Answer 6

The RetraxPRO XR Hard Tonneau Cover that fits the 2019 Toyota Tundra 5-1/2-foot bed with the deck rail system is part #RTT-80841 and this cover can be fitted with 65-inch Rhino-Rack crossbars. Order #RRVA165B-RRRLT600. Install instructions are linked…

view full answer...

Answer 7

There is not a minimum safe distance between the crossbars of the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. You'll just set the distance between the bars for whatever is appropriate for…

view full answer...

Answer 8

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 will fit the Roll N Lock tonneau cover with XT rails.

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

For the RetraxPRO XR Hard Tonneau Cover you can use the Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600 which will mount into the t-slots on the side rails. This will be as low profile as pretty much any other option but to make sure the…

view full answer...

Answer 11

The weight capacity for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 would remain the same at 220 lbs for this system even if you were to add another pair of crossbars to this…

view full answer...

Answer 12

Yakima offers a great solution that is compatible with the rails provided by your RetraxONE XR tonneau cover. The rack would assemble using the following parts: • Yakima 70 inch wide CoreBar crossbars, part #Y00423 • Yakima SkyLine Towers, part…

view full answer...