Troubleshooting Furrion Universal Remote Control Fireplace Operation

Question

Question:

My Furrion Unimote control wont operate my Furrion Electric fireplaces in my 2018 Heartland BC Thought I had it figured out but can’t get it to work. I push the TV /Fireplace button to and press the bottom buttons to switch on and nothing on either fireplace. The controls work the TVs great I know it’s going to be simple to fix Thanks

asked by: Dan M

0

Expert Reply:

Furrion Unismart Universal Remote Control # FR34FR will work as you stated. You will hit the tv/fireplace button and then use the bottom 4 buttons for the remote.

If it is not working, you will need to refer to the owners manual of your fireplace for more information according to the instructions for the remote I've attached. Most fireplaces have a remote control button that you need to select for that use.

expert reply by: Jason S

0

click to enlarge

Answer 1

Universal remote #FR34FR is compatible with Furrion brand fireplaces. While it might work with other brands it has not been tested so I can't guarantee it would work with anything other than a Furrion unit. The 4 buttons at the bottom are…

view full answer...

Answer 2

The Furrion Unismart Remote Control #FR34FR is compatible with your system #DV3300SBL as well as Furrion fireplace. You will not need a Furrion TV for the other components to work. I've attached a couple photos of the instruction manual to…

view full answer...

Answer 3

I reached out to my contact at Furrion who said that if your Furrion Remote, like part #FR34FR, isn't working even after replacing the batteries then there are 2 other things you can try. First off inspect the contacts where your batteries…

view full answer...

Answer 4

The Furrion Unismart Remote Control part #FR34FR that you looked at is designed to be used with only Furrion electronics like their TV's, Sound Systems and Fireplaces. When used in conjunction with these Furrion branded accessories the…

view full answer...

Answer 5

In order to use the Furrion Unismart Remote Control #FR34FR, which is no longer available with your Furrion fireplace, you'll want to press the "TV" button at the top of the remote, and then proceed by pressing and holding one of the…

view full answer...

Answer 6

I was able to find some instructions for the Furrion remote control #FR34FR and these are shown in the attached images. This is all the documentation that is currently available.

view full answer...

Answer 7

You should add one spacer washer at a time with the Fastway e2 Weight Distribution System #FA92-00-1000 as there is not a specific formula regarding one washer equaling a certain measurement. The reason for this is that there are too many variables…

view full answer...

Answer 8

The Furrion Unismart Remote Control #FR34FR sounds like it is not paired with your appliances. You will want to go back through the instructions to program the remote. The light is simply recognizing you are hitting a button and the battery is still…

view full answer...

Answer 9

The Furrion #FR34FR remote should be ready to use on the TV and Stereo. The fireplace will need to be programmed based on the specific fireplace instructions. To switch to fireplace on the remote you hit TV again. I've attached some photos to…

view full answer...

Answer 10

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 11

The Dometic RV toilets like the part #DOM29FR that you referenced use the standard 1/2 inch thread size for the supply line like most toilets do.

view full answer...

Answer 12

The Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR at its maximum output will produce 60,000 BTU an hour. So at its highest setting if it ran constantly (which it won't, it only runs on demand.) It will consume 0.65…

view full answer...