How Do You Program a Furrion FR34FR Universal Remote

Question

Question:

I purchased a Furrion FR34FR remote. I have a Furrion DV3300 Entertainment system and Furrin fireplace but a TCL TV. How do I program or pair the Furrion Remote to control the Entertainment center and fireplace without a Furrion TV

asked by: GARY Y

0

Expert Reply:

The Furrion Unismart Remote Control # FR34FR is compatible with your system # DV3300SBL as well as Furrion fireplace. You will not need a Furrion TV for the other components to work. I've attached a couple photos of the instruction manual to help. The TV button is used for functions other than the TV as you can see in the photos.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Furrion #FR34FR remote should be ready to use on the TV and Stereo. The fireplace will need to be programmed based on the specific fireplace instructions. To switch to fireplace on the remote you hit TV again. I've attached some photos to…

view full answer...

Answer 2

I was able to track down the install and programming instructions for the remote that comes with the Furrion televisions and attached them to this page. The universal remote #FR34FR will work the same way.

view full answer...

Answer 3

I reached out to my contact at Furrion who said that if your Furrion Remote, like part #FR34FR, isn't working even after replacing the batteries then there are 2 other things you can try. First off inspect the contacts where your batteries…

view full answer...

Answer 4

I was able to find some instructions for the Furrion remote control #FR34FR and these are shown in the attached images. This is all the documentation that is currently available.

view full answer...

Answer 5

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

view full answer...

Answer 6

Universal remote #FR34FR is compatible with Furrion brand fireplaces. While it might work with other brands it has not been tested so I can't guarantee it would work with anything other than a Furrion unit. The 4 buttons at the bottom are the…

view full answer...

Answer 7

Furrion Unismart Universal Remote Control #FR34FR will work as you stated. You will hit the tv/fireplace button and then use the bottom 4 buttons for the remote. If it is not working, you will need to refer to the owners manual of your fireplace for…

view full answer...

Answer 8

There is a universal remote that you can use, but not a Terk universal remote as they would not be compatible with a Furrion system. Instead, for your Furrion TV and DVD system, the correct replacement is the Furrion Unismart Remote Control #FR34FR,…

view full answer...

Answer 9

In order to use the Furrion Unismart Remote Control #FR34FR, which is no longer available with your Furrion fireplace, you'll want to press the "TV" button at the top of the remote, and then proceed by pressing and holding one of the…

view full answer...

Answer 10

You will want to press and hold the Mute and Select buttons on the Furrion Unismart Remote Control #FR34FR until the green light at the top flashes twice.

view full answer...

Answer 11

The Replacement Unismart Remote Control for Furrion Indoor TVs, Stereos, and Fireplaces #FR34FR will work with the following RV stereos: DV3100S, DV1230-BL, DV7200S, DV7100, DV3300S-BL, DV3100, DV1100, DV1000. Unfortunately, your RV information does…

view full answer...

Answer 12

Are you trying to program your TV to this remote? The Furrion remote part #FR34FR is designed to control Furrion TVs made after 2016 without any programming required. This is not a standard type of universal remote that would allow you to program it…

view full answer...

How Do You Program a Furrion FR34FR Universal Remote

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching