Replacement Brackets for Westin PRO TRAXX Nerf Bars on a 2016 Toyota Tacoma Double Cab

Question

Question:

Are these brackets for a 2016 Tacoma?

asked by: Drew

0

Expert Reply:

The Replacement Hardware Kit for Westin Pro series PRO TRAXX Step Bars part # 21-2352PK are designed to be used with the Westin PRO TRAXX Oval Nerf Bars part # 21-23520 or part # 21-23525 on a 2009 - 2014 Ford F-150 SuperCrew or 2011 - 2014 Ford F-150 Raptor. The most common misconception is that you can purchase nerf bars/running boards/bull bars/grille guards etc. off one vehicle and use them on another with the vehicle specific brackets and that is just not the case. The brackets are vehicle specific and so are the nerf bars/running boards/bull bars/grille guards etc.

Therefore, if you have the Westin PRO TRAXX Oval Nerf Bars part # 21-22775 part # 21-52770 and a 2016 Toyota Tacoma Double Cab then you can use the Replacement Hardware Kit for Westin Pro Series PRO TRAXX Oval Nerf Bars part # 21-2277PK to attach them.

expert reply by: Conner L

0

Answer 1

The Westin running board brackets you mentioned fit the #21-53720 which are a fit for the following vehicles: 2014 - 2018 GMC Sierra 1500 Crew Cab 2015 - 2019 GMC Sierra 2500 Crew Cab 2015 - 2019 GMC Sierra 3500 Crew Cab 2014 - 2018 Chevrolet…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...