Wiring Adapter Needed to Install Prodigy P3 from 2014 Toyota Tundra to 2018 Toyota Tundra

Question

Question:

I had the tekonsha p3 brand controllrr on my 2014 Tundra and I want to put it on my 2018 Tundra. I still have the wiring harness removed from my 2014 which has a ground wire that went over by the kick panel but it looks like the 2018 doesn’t. Can I still use my wiring harness from my 2014?

asked by: Justin G

0

Expert Reply:

Although the Prodigy P3 # 90195 can be used for your 2018 Toyota Tundra you will need to use the adapter # 3031-P instead of the current adapter # 3040-P that you used for your 2014 Tundra.

Please note that as of right now (February 2019) Tekonsha has not confirmed this adapter to fit. This information actually comes from Curt who has their adapter # C51455 which fits a 2015 - 2018 Tundra. You should have a connector for the adapter but I do recommend checking out the linked photos from the Curt instructions to verify that you have the connector. This seems to be a hit and miss thing with the newer Tundra pickups.

expert reply by: Jon G

0

click to enlarge

Answer 1

The 2018 Toyota Tundra was a bit of an oddity as there are several reported instances of models not coming equipped with the factory trailer brake controller plug under the dash for use with an aftermarket brake controller as the years before did.…

view full answer...

Answer 2

For your 2018 Toyota Tundra, the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In #3031-P may plug into your Tundra but according to my tech contact it will not work based on their testing. Even though Curt carried their…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 11

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 12

I have a few things for you to check when it comes to not being able to pair your iPhone with the Curt Echo #C51180. The first thing to do is make sure that you're pairing your phone with the Echo through the app. If you paired it through the…

view full answer...