Distance Between Steps of Lippert Kwikee 32 Series RV Steps

Question

Question:

Is this an 8inch rise/?

asked by: Dean H

0

Expert Reply:

The distance between the steps of the Lippert Kwikee 32 Series Electric Step # LC3722618 is 7 inches. I attached a picture that shows this dimension and the overall drop too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, the Kwikee motor kit from a 28 is the same as a 32 since the part #LC379145 is the kit for both so for just the frame you'd need the part #LC3722618 and it would fit your current motor.

view full answer...

Answer 2

It sounds like you're looking for the Replacement Gear Box and B Linkage for Kwikee Electric RV Steps #LC379161. This includes the gearbox and the linkage so you should be good to go for your Kwikee 28, 31, 37, or 39 steps!

view full answer...

Answer 3

When the Kwikee 909508000 part number has come up before it has been in relation to Kwikee 40 Series Steps which use the Replacement Control Unit for Kwikee 40 Series Electric RV Steps #LC363985. If those are the Kwikee steps that you have on your…

view full answer...

Answer 4

The Lippert Components Kwikee Step Frame 32 SERIES DOUBLE STEP (908032000) #LC3722618 is just the frame and is the replacement part you are seeking for your Series 32 steps. It does not include the motor or control switch.

view full answer...

Answer 5

If you're having an issue with the steps fully extending and retracting then that points to the motor. The control box reads the motor's voltage to send the signal to stop the steps so if the motor is not working correctly it will arc out too…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Distance Between Steps of Lippert Kwikee 32 Series RV Steps

Product Page this Question was Asked From

Continue Researching