Replacement Latch Lock Options for 1993 Enclosed Cargo Trailer

Question

Question:

I have a 1993 I think Wells Cargo trailer. The latch opening is 4.5H x 6.5W x 1D. Can you help find a replacement?

asked by: Debbie

0

Expert Reply:

We do not have a direct replacement for the size latch you have on your trailer. The Paddle Handle Locking Latch w/ Release - 5-1/2" Long x 4-1/4" Wide - Steel # PLR5115 for a 4-5/8" long x 3-3/8" cutout is the largest latch we carry. With some custom fabrication you can retro-fit your trailer to make this work but that 4.5 x 6.5 inch cutout is not a standard size.

expert reply by: Jason S

0

click to enlarge

Answer 1

That appears to be the Aluminum Eagle wheel from Lionshead. We currently only carry this wheel in an 8 lug 16" x 7". Our most similar wheel in a 15x6 is the Aluminum Liger Trailer Wheel #LH49FR. This is similar in design and color to your…

view full answer...

Answer 2

We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…

view full answer...

Answer 3

As you have come to find out, the paddle style handle you have on your Wells Cargo Trailer is very large and they just don't make anything that large to replace this nowadays. The largest paddle style handle we have is the Paddle Handle Locking…

view full answer...

Answer 4

The Paddle Handle Locking Latch w/ Release - 5-1/2" Long x 4-1/4" Wide - Steel #PLR5115 are not guaranteed to be keyed alike. I recommend using the Replacement Cam Lock Cylinder for RVs #295-000003 to get your keyed alike option, but you do…

view full answer...

Answer 5

We can provide you with 3 of the Redline locking L style door handle #276, unfortunately we do not offer them with a keyed alike option. There are a wide variety of different key/lock combinations and we cannot guarantee any specific key number. We…

view full answer...

Answer 6

I might have an option for you but we don't offer any flush door latches with an extended striker. However, the Full Size Locking Steel Flush Door Latch part #L3980 matches your door cutout at 4-5/8" long x 3-3/8" so this is our best…

view full answer...

Answer 7

I have a solution for you that is a little higher capacity than the #AM10501 that you asked about. You could use the ST235/85-16 tires in a load range G such as #TTWPRG235R16 which is rated for 4,400 pounds at 110 psi. Four of these would have an…

view full answer...

Answer 8

We have all sorts of door and vent parts for all types of trailers. And we can help you find items specific for horse trailers too; just click on the link provided to see all categories of items for horse trailers. Next click on the heading Door…

view full answer...

Answer 9

The Redline Flush Mounted Door Latch, #L3980, will mount in a door that has a 3-3/8 x 4-5/8 inch mounting hole. This latch is rust proof and will attach to the door using screws instead of pop rivets. If this latch cannot fit into your door's…

view full answer...

Replacement Latch Lock Options for 1993 Enclosed Cargo Trailer

Product Page this Question was Asked From

Continue Researching