Availability of Trailer Hitch for 2019 Infiniti QX50

Question

Question:

When will there be a hitch for the 2019 Infiniti Qx50 to put 2inch receiver bike rack onto? Do not plan on towing anything.

asked by: Candace S

0

Expert Reply:

I checked with both Draw-Tite and Curt and unfortunately there is not a trailer hitch available for your 2019 Infiniti QX50. It looks like a trailer hitch has not been available for the Infiniti QX50 since 2017, so the likelihood that one will be available in the future for your 2019 model is pretty slim. If you are wanting a way to transport your bikes your best option is going to be with a trunk-mount carrier.

I recommend taking a look at the Yakima FullBack 2-Bike # Y02634 or 3-Bike # Y02633 Carrier, both of which are confirmed to fit your 2019 Infiniti QX50.

This is a really nice carrier that features anti-sway cradles with ratcheting ZipStrip straps to hold the bikes securely at 3 different points, adjustable arms to help keep them level during transport, and rubber and foam pads on the contact points to protect your QX50 from any scratches. Locks are also included to help deter theft of your investments.

I have attached a short video demonstration on this bike rack that you can check out as well.

expert reply by: Chris R

0

Answer 1

It will not, unfortunately the trailer hitches we offer for the 2021 Kia Niro aren't compatible with plug in hybrid electric vehicles A/K/A PHEV's as the structure at the rear of the vehicle is different enough that the hitch won't fit.…

view full answer...

Answer 2

At this current time we do not have a trailer hitch yet confirmed to fit your 2023 Mercedes-Benz E-Class. For the time being if you're trying to haul bikes I recommend The Yakima FullBack 2 Bike Rack #Y02634.This rack can hold up to two bikes…

view full answer...

Answer 3

I can understand not wanting to remove or cut anything on your 2021 Toyota Highlander, but every single hitch for this vehicle requires some type of modification. There is one though, that requires the least amount, which is from Curt, and fits your…

view full answer...

Answer 4

In order to use a trunk mount bike rack like the Yakima FullBack 3 Bike Rack part #Y02633 on your 2013 Acura MDX while also towing a trailer you would indeed need to extend the connection point in order to prevent any turning clearance issues. For…

view full answer...

Answer 5

Unfortunately, none of our hitch manufacturers offer a hitch that's compatible with the Hyundai Ioniq plug in hybrid. If you were needing the hitch to carry bikes, a trunk mounted bike rack like the Yakima Fullback #Y02634 2-bike or #Y02633 for…

view full answer...

Answer 6

We carry a very handy 2 inch ball mount for this exact application. The part is #D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue…

view full answer...

Answer 7

If you have an a-frame type trailer frame a great option for transporting bikes is the Stromberg Carlson Bike Bunk #CC-275. This bolts on to a trailer's frame and fits frames from 14- to 55-inches wide. It provides a 2-inch receiver opening that…

view full answer...

Answer 8

All of the trailer hitches for the 2012 Volkswagen New Beetle, turbo, are Class I trailer hitches with a 1-1/4 inch receiver. To use a 2 inch accessory like your bike rack, you would have to use a 1-1/4 to 2 inch adapter, #HTAD. The use of an adapter…

view full answer...

Answer 9

The Curt Trailer Hitch #C11510 that you referenced fits up to a 2017 Infiniti QX50 but unfortunately it will not fit your 2019 Infiniti QX50. As of right now we don't have any trailer hitches that fit your vehicle, but we do have alternative ways…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...