Dimensions for Timbren Heavy-Duty Axle-Less Trailer Suspension ASR2KHDS04

Question

Question:

I have a Forest River trailer Ultra lite with a GVW of 6000 lbs. and am looking to replace the torsion axles with these ASR2KHDS04. Can you tell me the timbren axle plate dimensions length and width of unit so I can have the additional mounting plates made up since the frame is only 2inch wide. Thanks

asked by: Carl R

0

Expert Reply:

For the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 2,000 lbs # ASR2KHDS04, I've attached a photo with all the dimensions you were seeking but the basic plate dimensions are 4-3/4 inches by 13 inches for the base plate.

expert reply by: Jason S

0

click to enlarge

Answer 1

The inner diameter of the Stainless Steel Drive-In Grease Cap w/ Plug #DE69YR measures 1-7/8" (see attached).

view full answer...

Answer 2

There is an option for one of these systems with a rise, but there isn't an axle riser kit for the Timbren Axle-Less Trailer Suspension System - 2,000 lbs #ASR2000S01. Reason for that is since these aren't a thru-axle and mount right to the…

view full answer...

Answer 3

There's no reason you couldn't install either the Timbren Axle Less part #ASR5200S04 with 4 inch drop spindles or the part #ASR5200S01 on an aluminum framed trailer.

view full answer...

Answer 4

To determine the distance from the spindle to the ground you basically just need to take the overall diameter of the wheel and tire and divide by two. Since the tire size 205/75-15 is right at 27 inches in diameter the distance would be 13.5 inches.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...